Greetings,
Installed the kernel on my desktop via yum. When I rebooted the machine
installed and couldn't get to the start of services. Sorry, but I've got
no log to show you.
fyi,
Max Pyziur
pyz@xxxxxxxxx
Soporific details about my machine below:
P3-1.4GHZ, 1GB RAM, 2 HDDs
hdparm info:
/dev/hda:
Model=MAXTOR 6L040J2, FwRev=A93.0500, SerialNo=362169120743
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
BuffType=DualPortCache, BuffSize=1819kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78177792
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: ATA/ATAPI-1
ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5
* signifies the current active mode
root@brill ~> hdparm -i /dev/hdb
/dev/hdb:
Model=ST3120026A, FwRev=3.06, SerialNo=3JT12L7C
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234441648
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1
ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
lspci info:
root@brill ~> lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
Flags: bus master, medium devsel, latency 8
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f6000000-f8ffffff
Prefetchable memory behind bridge: f4000000-f5ffffff
Capabilities: [80] Power Management version 2
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
Subsystem: Tyan Computer Unknown device 0000
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if
8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Flags: bus master, medium devsel, latency 32
I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
Flags: medium devsel, IRQ 9
Capabilities: [68] Power Management version 2
00:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
07)
Subsystem: Creative Labs CT4832 SBLive! Value
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at dc00 [size=32]
Capabilities: [dc] Power Management version 1
00:08.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at e000 [size=8]
Capabilities: [dc] Power Management version 1
00:09.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
100] (rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management
Adapter
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at fa100000 (32-bit, non-prefetchable) [size=4K]
I/O ports at e400 [size=64]
Memory at fa000000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 50000000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at fa101000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at fa102000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450
(rev 04) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G400 16Mb SGRAM
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at f4000000 (32-bit, prefetchable) [size=32M]
Memory at f6000000 (32-bit, non-prefetchable) [size=16K]
Memory at f7000000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at f6010000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0
