Ok, will do. -----Original Message----- From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Tim Waugh Sent: 17 November 2006 14:40 To: For users of Fedora Subject: RE: cups issues with OutputBin postscript option On Fri, 2006-11-17 at 14:00 +0000, Steve Hanselman wrote: > I'm not using that, this was due to an issue with the system v > interfaces (from some time back). > > No printers appear there, all were defined solely using the web > interface, ok, guess I just need to go back and use the web interface to > redefine them then? Ah, if you created the printers using the web interface they should still be there after the update and should still be working as before. Sounds like you might be right about the pre-processor causing problems, Could you file a bug in Bugzilla please, against cups, and attach your /etc/cups/ppd/ PPD file there? Thanks, Tim. */ The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email 'technical@xxxxxxxxxxxxxx' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk
