Thanks for the response Gordon. Please see mine below.
>Knute Johnson wrote:
>>
>> 3) I get vertical lines when I use the backspace or right arrow over
>> text. It shows up in Firefox text boxes and text in the main display
>> window. It doesn't happen when I backspace over text in Open Office
>> Writer.
>
>It's probably a display driver bug. You might be better off rolling
>back to FC5, if it had a reliable video driver. What card?
NVidia Quadro NVS 285 - Dual port
>
>> 4) Minimized windows don't show up on the lower panel. You have no
>> idea that you have a minimized window anywhere. If I hit Alt-Esc
>> hidden windows will maximize.
>
>Right-click lower panel -> Add to Panel -> select "Window List" and add.
That solved that one, thanks.
>> 5) Dual head doesn't work but I don't think it has ever.
>
>Single video card or two?
Single NVidia Quadro NVS 285
>> 6) I installed both Gnome and KDE because I wanted to see what KDE
>> looked like. Now if I switch to KDE, it starts with a dialog "I've
>> Detected a Panel Already Running and Will Now Exit". The Gnome
>> panels at the top and bottom of the screen are visible along with the
>> KDE panel at the bottom of the screen above the Gnome one.
>
>Sounds like you're starting KDE while Gnome is running? It won't work.
> Select KDE at the login screen, before entering your username/password,
I used the Sessions link at the bottom of the login screen. It
doesn't matter if I set KDE as the default or single session. When I
just tried it I got another applet error that I forgot to write down.
>> 7) cdrecord -scanbus returns the following message. I did manage to
>> write the Zod DVD by right clicking on the file icon.
>
>Check "dmesg" to see if there were problems loading the SCSI driver.
>Or, if you have a USB DVD writer, this might be related to the first
>problem that you reported (in which case, you might want to roll back to
>FC5, again).
Complete dmesg is below. I included the whole thing because I wasn't
sure what was relevant for what. I didn't see any errors. Thanks.
[knute@knute ~]$ dmesg
Linux version 2.6.18-1.2849.fc6
(brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20061011
(Red
Hat 4.1.1-30)) #1 SMP Fri Nov 10 12:36:14 EST 2006 BIOS-provided
physical
RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fe8ac00 (usable)
BIOS-e820: 000000003fe8ac00 - 000000003fe8cc00 (ACPI NVS)
BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI data)
BIOS-e820: 000000003fe8ec00 - 0000000040000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 261770
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32394 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough
ACPI: RSDP (v002 DELL ) @ 0x000feb00
ACPI: XSDT (v001 DELL WS 380 0x00000007 ASL 0x00000061) @
0x000fd266
ACPI: FADT (v003 DELL WS 380 0x00000007 ASL 0x00000061) @
0x000fd35e
ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050211) @
0xfffcd764
ACPI: MADT (v001 DELL WS 380 0x00000007 ASL 0x00000061) @
0x000fd452
ACPI: BOOT (v001 DELL WS 380 0x00000007 ASL 0x00000061) @
0x000fd4c4
ACPI: ASF! (v016 DELL WS 380 0x00000007 ASL 0x00000061) @
0x000fd4ec
ACPI: MCFG (v001 DELL WS 380 0x00000007 ASL 0x00000061) @
0x000fd553
ACPI: HPET (v001 DELL WS 380 0x00000007 ASL 0x00000061) @
0x000fd591
ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050211) @
0x00000000
ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000
ACPI:
LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC
version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05]
disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC_NMI
(acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08]
address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32,
address
0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
dfl
dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI:
IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used
by
override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET
id:
0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration
information Allocating PCI resources starting at 50000000 (gap:
40000000:b0000000) Detected 2992.738 MHz processor. Built 1
zonelists.
Total pages: 261770 Kernel command line: ro
root=/dev/VolGroup00/LogVol00
rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to
ffffc000
(fec00000) Enabling fast FPU save and restore... done. Enabling
unmasked
SIMD FPU exception support... done. Initializing CPU#0 CPU 0
irqstacks,
hard=c079f000 soft=c077f000 PID hash table entries: 4096 (order: 12,
16384
bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries:
131072
(order: 7, 524288 bytes) Inode-cache hash table entries: 65536
(order: 6,
262144 bytes) Memory: 1030640k/1047080k available (2106k kernel code,
15648k reserved, 843k data, 240k init, 129576k highmem) Checking if
this
processor honours the WP bit even in supervisor mode... Ok. hpet0: at
MMIO
0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0 hpet0: 3 64-bit timers,
14318180 Hz Using HPET for base-timer Calibrating delay using timer
specific routine.. 5989.35 BogoMIPS (lpj=2994676) Security Framework
v1.0.0 initialized SELinux: Initializing. SELinux: Starting in
permissive mode selinux_register_security: Registering secondary
module
capability Capability LSM initialized as secondary Mount-cache hash
table
entries: 512 CPU: After generic identify, caps: bfebfbff 20100000
00000000
00000000 0000649d 00000000 00000001 CPU: After vendor identify, caps:
bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
monitor/mwait feature present. using mwait in idle threads. CPU:
Trace
cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical
Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps:
bfebf3ff 20100000 00000000 00000180 0000649d 00000000 00000001 Intel
machine check architecture supported. Intel machine check reporting
enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24)
available
Checking 'hlt' instruction... OK. SMP alternatives: switching to UP
code
ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) D CPU 3.00GHz
stepping 07 SMP alternatives: switching to SMP code Booting processor
1/1
eip 3000 CPU 1 irqstacks, hard=c07a0000 soft=c0780000 Initializing
CPU#1
Calibrating delay using timer specific routine.. 5985.21 BogoMIPS
(lpj=2992605) CPU: After generic identify, caps: bfebfbff 20100000
00000000 00000000 0000649d 00000000 00000001 CPU: After vendor
identify,
caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000001
monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D
cache: 16K
CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor
Core ID:
1 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000180
0000649d
00000000 00000001 Intel machine check architecture supported. Intel
machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon
Extended MCE
MSRs (24) available CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping
07
Total of 2 processors activated (11974.56 BogoMIPS). ENABLING IO-APIC
IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC
synchronization across 2 CPUs: passed. Brought up 2 CPUs
sizeof(vma)=84
bytes sizeof(page)=32 bytes sizeof(inode)=424 bytes
sizeof(dentry)=148
bytes sizeof(ext3inode)=600 bytes sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes sizeof(task_struct)=1392 bytes
migration_cost=513
checking if image is initramfs... it is Freeing initrd memory: 2248k
freed
NET: Registered protocol family 16 ACPI: bus type pci registered PCI:
Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter
enabled
ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0]
(0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge
[\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller
0000:00:1f.1
Boot video device is 0000:01:00.0 PCI: Transparent bridge -
0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI
Interrupt
Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing
Table
[\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCI5._PRT] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.PCI6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6
7 9
10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10
11 12
15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI:
PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI:
PCI
Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI
Interrupt
Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link
[LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15) Linux Plug and Play Support
v0.97
(c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices
usbcore:
registered new driver usbfs usbcore: registered new driver hub PCI:
Using
ACPI for IRQ routing PCI: If a device doesn't work, try
"pci=routeirq".
If it helps, post a report NetLabel: Initializing NetLabel: domain
hash
size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel:
unlabeled
traffic allowed by default pnp: 00:01: ioport range 0x800-0x85f could
not
be reserved pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
pnp:
00:01: ioport range 0x860-0x8ff has been reserved PCI: Bridge:
0000:00:01.0
IO window: disabled.
MEM window: fc000000-feafffff
PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: fbf00000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: fbe00000-fbefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI:
Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI
Interrupt
0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting
latency
timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt
0000:00:1c.4[A] ->
GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device
0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17
(level,
low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.5 to
64
PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET:
Registered
protocol family 2 IP route cache hash table entries: 32768 (order: 5,
131072 bytes) TCP established hash table entries: 131072 (order: 9,
2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720
bytes) TCP: Hash tables configured (established 131072 bind 65536)
TCP
reno registered Simple Boot Flag at 0x7a set to 0x1 apm: BIOS version
1.2
Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP
safe.
audit: initializing netlink socket (disabled)
audit(1163598960.994:1):
initialized highmem bounce pool size: 64 pages Total HugeTLB memory
allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table
entries:
1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks
Initializing Cryptographic API ksign: Installing public key data
Loading
keyring - Added public key 6E10EEA41F0341D3 - User ID: Red Hat, Inc.
(Kernel Module GPG key) io scheduler noop registered io scheduler
anticipatory registered io scheduler deadline registered io scheduler
cfq
registered (default) PCI: Setting latency timer of device
0000:00:01.0 to
64 assign_interrupt_mode Found MSI capability Allocate Port
Service[0000:00:01.0:pcie00] Allocate Port
Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability Allocate Port
Service[0000:00:1c.0:pcie00] Allocate Port
Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer
of
device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port
Service[0000:00:1c.4:pcie02] Allocate Port
Service[0000:00:1c.4:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability Allocate Port
Service[0000:00:1c.5:pcie00] Allocate Port
Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03] ACPI Exception
(acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present
[20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception
(acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present
[20060707] ACPI: Getting cpuindex for acpiid 0x4 isapnp: Scanning for
PnP
cards... isapnp: No Plug & Play device found Real Time Clock Driver
v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface
v0.101 (c)
Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at
I/O
0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a
16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096
blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide:
Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt
0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169 ICH7: chipset
revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: HL-DT-ST GCE-8487B, ATAPI CD/DVD-ROM drive
hdb: HL-DT-ST DVD+/-RW GWA4164B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 370k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 225
PCI:
Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd
0000:00:1d.0:
UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered,
assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 225, io base
0x0000ff80
usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub
found
hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] ->
GSI
22 (level, low) -> IRQ 233 PCI: Setting latency timer of device
0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd
0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd
0000:00:1d.1: irq 233, io base 0x0000ff60 usb usb2: configuration #1
chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports
detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ
50 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd
0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 50, io
base
0x0000ff40 usb usb3: configuration #1 chosen from 1 choice hub 3-
0:1.0:
USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt
0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 58 PCI: Setting latency
timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host
Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus
number 4 uhci_hcd 0000:00:1d.3: irq 58, io base 0x0000ff20 usb usb4:
configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub
4-0:1.0: 2 ports detected usb 1-2: new low speed USB device using
uhci_hcd
and address 2 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller
(OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21
(level,
low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.7 to
64
ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7:
new USB
bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug
port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 225, io mem 0xffa80800 ehci_hcd
0000:00:1d.7:
USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5:
configuration #1
chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports
detected usb 1-2: device descriptor read/all, error -71 SCSI
subsystem
initialized libata version 2.00 loaded. ahci 0000:00:1f.2: version
2.0
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 66
usb
5-6: new high speed USB device using ehci_hcd and address 5 PCI:
Setting
latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI
0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci
0000:00:1f.2:
flags: 64bit ncq pm led clo pio slum part ata1: SATA max UDMA/133 cmd
0xF8836D00 ctl 0x0 bmdma 0x0 irq 74 ata2: SATA max UDMA/133 cmd
0xF8836D80
ctl 0x0 bmdma 0x0 irq 74 ata3: SATA max UDMA/133 cmd 0xF8836E00 ctl
0x0
bmdma 0x0 irq 74 ata4: SATA max UDMA/133 cmd 0xF8836E80 ctl 0x0 bmdma
0x0
irq 74 scsi0 : ahci usb 5-6: configuration #1 chosen from 1 choice
hub
5-6:1.0: USB hub found hub 5-6:1.0: 4 ports detected usb 1-2: new low
speed USB device using uhci_hcd and address 4 ata1: SATA link up 3.0
Gbps
(SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 156250000
sectors: LBA48 NCQ (depth 31/32) ata1.00: ata1: dev 0 multi count 8
ata1.00: configured for UDMA/133 scsi1 : ahci usb 1-2: configuration
#1
chosen from 1 choice input: Dell Dell USB Keyboard as
/class/input/input0
input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on
usb-0000:00:1d.0-2 usb 2-2: new low speed USB device using uhci_hcd
and
address 2 ata2: SATA link down (SStatus 0 SControl 300) scsi2 : ahci
usb
2-2: configuration #1 chosen from 1 choice input: Logitech Optical
USB
Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech
Optical
USB Mouse] on usb-0000:00:1d.1-2 usb 3-1: new full speed USB device
using
uhci_hcd and address 2 ata3: SATA link up 3.0 Gbps (SStatus 123
SControl
300) ata3.00: ATA-7, max UDMA/133, 156250000 sectors: LBA48 NCQ
(depth
31/32) ata3.00: ata3: dev 0 multi count 8 ata3.00: configured for
UDMA/133
scsi3 : ahci usb 3-1: configuration #1 chosen from 1 choice ata4:
SATA
link down (SStatus 0 SControl 300)
Vendor: ATA Model: HDS728080PLA380 Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: HDS728080PLA380 Rev: PF2O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 156250000 512-byte hdwr sectors (80000 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 156250000 512-byte hdwr sectors (80000 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
sd 2:0:0:0: Attached scsi disk sdb
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1163598968.042:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1564 types, 170 bools, 1 sens, 1024 cats
security: 59 classes, 48633 rules SELinux: Completing
initialization.
SELinux: Setting up existing superblocks. SELinux: initialized (dev
dm-0,
type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs),
uses
genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs SELinux: initialized (dev debugfs, type debugfs),
uses
genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs),
uses
genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses
transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs),
uses
genfs_contexts SELinux: initialized (dev devpts, type devpts), uses
transition SIDs SELinux: initialized (dev eventpollfs, type
eventpollfs),
uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs),
uses
genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs SELinux: initialized (dev futexfs, type futexfs),
uses
genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses
task
SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for
labeling SELinux: initialized (dev proc, type proc), uses
genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux:
initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux:
initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1163598968.387:3): policy loaded auid=4294967295 intel_rng: FWH
not
detected sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0:
Attached
scsi generic sg1 type 0 input: PC Speaker as /class/input/input2
tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt 0000:04:00.0[A] ->
GSI
17 (level, low) -> IRQ 177 PCI: Setting latency timer of device
0000:04:00.0 to 64 eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001
PHY(5750)]
(PCI Express) 10/100/1000BaseT Ethernet 00:13:72:14:19:35 eth0:
RXcsums[1]
LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0:
dma_rwctrl[76180000] dma_mask[64-bit] ACPI: PCI Interrupt
0000:00:1f.3[B]
-> GSI 17 (level, low) -> IRQ 177 hda: ATAPI 48X CD-ROM CD-R/RW
drive,
1536kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdb:
ATAPI 48X
DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Floppy drive(s):
fd0
is 1.44M ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ
169 PCI: Setting latency timer of device 0000:00:1b.0 to 64 floppy0:
no
floppy controllers found Floppy drive(s): fd0 is 1.44M floppy0: no
floppy
controllers found parport: PnPBIOS parport detected. parport0: PC-
style at
0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0
(interrupt-driven). lp0: console ready SELinux: initialized (dev
ramfs,
type ramfs), uses genfs_contexts NET: Registered protocol family 10
lo:
Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ACPI:
Power
Button (FF) [PWRF] ACPI: Power Button (CM) [VBTN] md: Autodetecting
RAID
arrays. md: autorun ... md: ... autorun DONE. device-mapper:
multipath:
version 1.0.4 loaded EXT3 FS on dm-0, internal journal kjournald
starting.
Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs:
mounted filesystem with ordered data mode. SELinux: initialized (dev
sdb1,
type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs),
uses
transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01.
Priority:-1 extents:1 across:2031608k SELinux: initialized (dev
binfmt_misc, type binfmt_misc), uses genfs_contexts ip6_tables: (C)
2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core
Team
Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8180
buckets, 65440 max) - 228 bytes per conntrack process `sysctl' is
using
deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time;
Use
net.ipv6.neigh.lo.base_reachable_time_ms instead.
ADDRCONF(NETDEV_UP):
eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full
duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready SELinux:
initialized
(dev autofs, type autofs), uses genfs_contexts SELinux: initialized
(dev
autofs, type autofs), uses genfs_contexts SELinux: initialized (dev
autofs, type autofs), uses genfs_contexts eth0: no IPv6 routers
present
--
Knute Johnson
Molon Labe...
