Hi all, I'm in the process of reconfiguring a FC5 Proliant servers dual nic But before I actually change anything ( server is in production ) I need some help with my setup as this is the first time I've ventured into this :-) I hope some of you gurus can help me with this and point out if this is the correct way, or if there's an easier/better way to do it, and if I'm missing anything in the setup. Any input/help would be greatly appreciated All the best Lars Sorensen Below is the setup I've seen on another running server: cat /etc/modprobe.conf alias bond0 bonding options bond0 mode=1 miimon=100 alias eth0 tg3 alias eth1 tg3 alias scsi_hostadapter cciss [root@localhost ~]# cat /root/ifcfg-eth0 # Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no TYPE=Ethernet [root@localhost ~]# cat /root/ifcfg-eth1 # Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no TYPE=Ethernet [root@localhost ~]# cat /root/ifcfg-bond0 DEVICE=bond0 BOOTPROTO=none ONBOOT=yes USERCTL=no IPADDR=0.0.0.0 [root@localhost ~]# cat /root/ifcfg-bond0.10 DEVICE=bond0.10 BOOTPROTO=none ONBOOT=yes USERCTL=no REORDER_HDR=no IPADDR=212.xx.xx.248 NETMASK=255.255.255.224 GATEWAY=212.xx.xx.225 [root@localhost ~]# cat /etc/sysconfig/static-routes net 192.168.1.0 netmask 255.255.255.0 gw 212.xx.xx.228
