On Tuesday 07 November 2006 23:40, Aaron Konstam wrote:
> On Tue, 2006-11-07 at 19:57 +0000, Anne Wilson wrote:
> > On Tuesday 07 November 2006 19:43, Nigel Henry wrote:
> > > According to the Alsa soundcard matrix, and as Anne has said, your card
> > > uses the emu10k1 driver, but you want to modprobe snd-emu10k1 which is
> > > the Alsa driver. I only have FC5 and earlier versions of FC, but I've
> > > put the relevant stuff for FC5's /etc/modprobe.conf below.
> > >
> > > alias snd-card-0 snd-emu10k1
> > > options snd-card-0 index=0
> > > options snd-emu10k1 index=0
> > > remove snd-emu10k1 { /usr/sbin/alsactl store 0 >/dev/null 2>&1
> > >
> > > || : ; }; /sbin/modprobe -r --ignore-remove snd-emu10k1
> > >
> > > I don't know if this will work, as this is from FC5,
> >
> > Just to confirm, in FC6 my audigy soundcard has these lines
> >
> > alias snd-card-0 snd-emu10k1
> > options snd-card-0 index=0
> > options snd-emu10k1 index=0
> > remove snd-emu10k1 { /usr/sbin/alsactl store 0 >/dev/null
> > 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-emu10k1
> >
> > When I view modprobe.conf full-screen I see that the last two lines above
> > are actually all on one line, with one space between the semi-colon
> > and /sbin/modprobe
> >
> > HTH
> >
> > Anne
>
> Ok, we are moving forward. The card is not recognised but no sound. I
> lied as said I heard it but now two further problems:
>
> 1. The volume control says when run: No volume control GStreamer plugins
> and/or devices found.
>
> 2. alsamixer when run says: sound_ctrl_open failed for default : no such
> device.
>
> It is getting curiouser and curiouser out there. Any further advice.
Can you post the output of /sbin/lsmod, just to see what has been loaded. Also
you could try as root /usr/sbin/alsactl restore. If there are any mixer
settings there, this should get something showing in alsamixer. Post the
output of cat /proc/asound/cards as well, just to see where the card is
located.
I'm still using FC1,2,3,4,and 5. I've seen so many problems with FC6 that I'm
glad I havn't installed it yet.
Over to you.
Nigel.
