On Tuesday 07 November 2006 20:28, Gene Heskett wrote: > On Tuesday 07 November 2006 14:51, Anne Wilson wrote: > >One of my biggest interests is capturing footage from my analogue > > camcorder and converting it to DVD disks. I've been working with this > > under FC4 without problems, but I'm falling at the first fence under > > FC6. I need tvtime, xawtv or similar to act as monitor while capturing > > with mjpegtools. > > > >My capture card is a DC10+, which uses the zoran driver. Under FC4 the > >requirements were > > > >Modules - zr36060, zr36067, adv7175, saa7110, zoran, 12c-algo-bit, > > 12c-core, videocodec > > > >Video4linux (v4l) installed and running. > > Humm, the drivers from the mxhaard site in france worked reasonably well if > the starting syntax can be grokked. However, it turns out that even a $70 > dollar webcam is, photographicly speaking, a POS. Color is basicly way > off, with no chance of software corrections as the error is in gamma > tracking from color to color, and with it plugged into a usb1.1 port, only > about 6 frames per second. The only thing I have thats gives a good image > in real time is my Sony TVR-460, plugged into a firewire port. > Hi, Gene. We're talking two different things here. My other thread is about the webcam. This is about my Sony camcorder. I did quite a lot of video capture from it under FC4, converting to DVDs, but I still have quite a few tapes to convert, so I have to get this going again or revert to FC4. Anne
Attachment:
pgpr3QFVf7cjr.pgp
Description: PGP signature
