On Sat, 2006-10-21 at 09:23 -0400, David Nedrow wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > This has me completely flummoxed. > > I have a Sun Fire x4200 with four drives internal drives on an (LSI) > SAS1064 RAID controller. Drives 0&1 have been mirrored, as have 2&3. > > The installation of FC5 (and FC6 tests) goes without a problem. > HOWEVER, after the reboot the system stop booting at the point where > grub should start displaying. > > I've tried a number of variations, eg. grub on boot volume rather > than MBR, etc. > > Interestingly enough, if I don't mirror the drives, FC boots without > a problem after the installation. If I then use the RAID controller > to mirror the boot drive, I'm back to the "bad" behavior where grub > never appears. > > I hope someone out there may have run into this and solved it. Didja do a clean install or an upgrade? Ric -- ================================================ My father, Victor Moore (Vic) used to say: "There are two Great Sins in the world... ...the Sin of Ignorance, and ...the Sin of Stupidity. Only the former may be overcome." R.I.P. Dad. Linux user# 44256 Sign up at: http://counter.li.org/ http://www.sourceforge.net/projects/oar http://www.wayward4now.net ================================================
