Mogens Kjaer wrote:
Bryan Hepworth wrote:
Hi Everyone
I know this is off-topic seeing as how it's about sendmail but I was
hoping someone could help out.
I have a machine with two ethernet cards in - previously these sat on
two different networks to take email from inside and deliver it to the
smarthost externally. Now that the network has been changed to 192.168
arrangement we don't need both ethernet connections, but I have noticed
a distinct delay on the other ethernet card to get a connection,
sometimes over a minute.
What is the second ethernet card connected to?
I assume that you havn't connected both network cards
to the same network (this will give an answer to your problems).
What is the output of ifconfig?
Mogens
eth0 Link encap:Ethernet HWaddr 00:E0:18:F1:71:75
inet addr:93.1.1.208 Bcast:93.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::2e0:18ff:fef1:7175/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1613 errors:0 dropped:0 overruns:1 frame:0
TX packets:1714 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:184622 (180.2 KiB) TX bytes:1764140 (1.6 MiB)
Interrupt:5 Base address:0xb000
eth1 Link encap:Ethernet HWaddr 00:E0:18:F3:0E:75
inet addr:192.168.2.4 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:18ff:fef3:e75/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2218 errors:0 dropped:0 overruns:0 frame:0
TX packets:1958 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:920142 (898.5 KiB) TX bytes:251040 (245.1 KiB)
Interrupt:11 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2325 errors:0 dropped:0 overruns:0 frame:0
TX packets:2325 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2575772 (2.4 MiB) TX bytes:2575772 (2.4 MiB)
