On Mon, 2006-09-11 at 16:05 +0200, Przemyslaw Gawronski wrote: > > You'll have to delete the array for that. > > OK, I managed to do that under windows, without a RAID controller. There > is no way to do it under Linux without a hardware RAID controller? > > Przemek I'm not sure I fully understand the problem. If you are using a supported hardware RAID, the drives are combined into a RAID array, Linux will view them as a single RAID drive. If you are using a non supported hardware RAID (mostly semi-hardware on-board IDE/SATA RAID chipsets), you'll either see the drives as two single drives or will not see them at all. Start from scratch. Post the complete hardware configuration. What you have, and what you are trying to achieve. - Gilboa
