Re: Fedora 64-bit Graphics Problems on Install

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jeff,

I just want to Thank You for answering my email, regarding the problem I was having with the 64-bit Fedora and my graphics card! I followed the advice you gave me, using Stanton's Installation notes and everything now works great!

I originally installed it in text mode, because of the graphics card problem. I was then later able to install the video driver for NVIDIA 6600, and now I see the GUI!

Thanks again for your advice, I really appreciate it! I have 64-bit Linux on my machine before Windows XP 64-bit!


John

----- Original Message ----- From: "Jeff Vian" <jvian10@xxxxxxxxxxx>
To: "For users of Fedora Core releases" <fedora-list@xxxxxxxxxx>
Sent: Monday, August 28, 2006 12:10 PM
Subject: Re: Fedora 64-bit Graphics Problems on Install


On Sun, 2006-08-27 at 13:54 -0400, John Trager wrote:
Hello All,

Here is a rundown on my computer:

AMD Athlon64 3800+ with 2GB RAM with ASUS AV8 Motherboard


The first thing I tried to do was to download the Fedora 64-bit
version onto a single DVD, which was no problem.

I then tried to install it on my SATA hard drive with a 200GB
Partition... when it probes my video card, the screen goes dark for a
bit, and then after sometime, I get vertical lines on the screen, and
some more garbage later on...  It appears that the video driver isn't
working correctly.  It is selecting the NVIDIA 6600 driver...  Is
there a way to tell the install program to use the VESA driver
(generic) for the graphical install???

I did try to install it using the Text version, and it went through
fine, but there was NO GUI interface... I guess when one does this it
uses the standard VESA driver (generic)?


MY FIRST CHOICE is to get the 64-bit version working, but I have also
tried the RAD HAT ENTERPRISE 32-bit version.  This for the most part
works fine, but there are some issues which I think is related to the
64-bit install.  When I install the 32-bit version, it probes my
computer and picks the VESA driver (generic), which then works fine.
Now, I have tried the NVIDIA 6600 display driver in the list for
graphics hardware... and when I do this it does the same thing as with
the 64-bit install!  Something doesn't seem right with these drivers,
or am I doing something wrong???  I used the
NVIDIA-Linux-x86-1.0-pkg1.run file on the PNY Technologies website.  I
typed "init 3" before install it.  I didn't change some of the other
things that are mentioned by various people (Change Driver "nv" to
Driver ?nvidia"...) because there was no file there yet called
"XF86Config".  As a matter of fact, after I installed this driver, I
still do not see this file!  However when I boot up the Linux System,
I see the NVIDIA LOGO on my monitor... and there is also a NVIDIA X
Server type area in one of the pull down windows (system settings?)...
Where would this driver appear?  Would it take the place of the NVIDIA
6600 driver under display hardware?  I'm new to Linux...

Am I better installing the 32-bit Fedora version or the 64-bit
version?  It sure would be nice to see a 64-bit version operating on
this machine!
My recommendation is a bit different than you have tried.
I also have the nvidia 6600 video card and was unable to do a graphics
install, but the text install worked well.

The instructions and the package you are using are very old.  XF86config
is no longer used since Fedora switched to xorg for the video drivers.
If you want to use the source package for the drivers (which will work)
you would be better using the driver directly from nVidia and following
their instructions. It seems like the one from PNY is out of date.

I prefer the pre-built driver from the livna repo.

First you need to be in run level 3.
Then enable the livna repo and yum install kmod-nvidia
reboot and it should come up with graphics using the nvidia driver.

The only additional step I had to do was to manually set the vertical
sync for my system in the monitor section of the xorg.conf file.  It
refuses to automatically select the default VertRefresh value for my
Samsung T and I have to manually set that in order to use the maximum
resoulution.

With that I have been very happy using x86_64 and the nVidia driver.

Instructions for a lot of things FC5 related (including the nvidia
drivers) can be found at the great web site provided by Stanton Finley
http://stanton-finley.net/fedora_core_5_installation_notes.html






Thanks for any help!


John

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux