I have to face a similar problem. I am installing FC5 as a host OS on VMware with Windows XP as the guest. I already have 2 virtual machines of FC4, running on the same hardware and Vmware.
When installing FC5, it says that it cannot find media to install on.
What I am confused about is if the FC4 was able to detect the existing harddrive, why cannot FC5?
Abid Ghufran.
On 7/9/06, Robert G. (Doc) Savage <dsavage@xxxxxxxxxxx> wrote:
On Sat, 2006-07-08 at 22:50 +0200, Marc Bruggeman wrote:
> Hi all,
> I wanted to install FC5 on a Dell PowerEdge server that is equipped with
> SCSI disks only,but i can't make it work. The installation process
> stops and reboots the PC after message has been given that no media has
> been found to perform the installation.
> I have been trying to find information or documentation on how perform
> this installation but so far have not found any usefull information yet.
> Can someone explain how I can get this installation started, or where I
> can find the necesary information.
Marc,
You're not telling FC5's anaconda installer to use the correct driver
for your PowerEdge RAID Controller (PERC) card. Depending on which Dell
server you have, it uses a PERC/2, PERC/3, or PERC/4 (newest) card. FC5
supports PERC/3 and PERC/4 cards with the megaraid driver. I believe
there are compile-time options for this driver that support earlier
PERC/2 and MegaRAID 428/466/... cards. With kernel-devel installed, see
the /usr/src/kernels/2.6.xxxxx/drivers/scsi/megaraid directory.
Once you select the megaraid driver, anaconda will then proceed using
the /dev/sd{a..z} device(s), add an scsi0 alias to /etc/modprobe.conf,
and build an initial ramdisk (using mkinitrd) in /boot so your server
can boot from a physical or logical (e.g. RAID0/1/5 array) SCSI drive
controlled by the PERC card. Subsequent kernel updates will
automatically create new initrd-xxxx.img files.
-- Doc
Robert G. (Doc) Savage
FC5 (2.6.17-1.2145) on IBM ThinkPad A22p
"Bob Costas for baseball commissioner"
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
