If the server you're connecting to is an SSH1 server, you're going to have to enable SSH1 on your FC5 client. Or if you have control over the server you're connecting to, change the settings or update the SSH software to allow SSH2 connections. One thing I find helpful when I'm troubleshooting ssh is connecting with $ ssh -v some_host The "-v" is for verbose mode. You can get more information with "-vv" and even more with "-vvv". One thing you'll be able to do is to see if your connecting and getting rejected by the server (which means it's not a firewall problem) or whether you're not connecting at all (could be a firewall problem, either on your end or theirs). Indications are that it's not a firewall problem since you were able to use telnet to connect to port 22 on the remote server. === Al --- RyAnZ <nocph@xxxxxxx> wrote: > Hi, sorry my English is not that good that's why I minimize my words. > > Here are some details... I'm connecting from different network eth0 is > private 10.10.x.x and eth1 is public 203.x.x.x, no problem on connecting > internal but the external I cant connect. I tried telnet on port 22 the > results below: > > SSH-2.0-OpenSSH_4.3 > > Protocol mismatch. > > > Connection to host lost. > > I tried disabling the iptables still doesn't work, I copied my ssh_config > from core4 still doesn't work.. > > Any suggestion? > > Thanks > > -----Original Message----- > From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx] > On Behalf Of Jay Cliburn > Sent: Tuesday, July 04, 2006 9:39 AM > To: For users of Fedora Core releases > Subject: Re: SSH > > On Tue, 2006-07-04 at 09:30 +0800, RyAnZ wrote: > > Hi Guys, > > > > I have a problem connecting on ssh2 I have a fresh install fedora core 5. > It > > jus doesn't work. No error. > > More detail needed. Does the connection eventually time out? Are you > trying to connect to another machine on your LAN or on another network? > Can you cut and paste the connection attempt here? Have you run a > packet capture using, say, ethereal to see if the remote machine is > answering? Have you used the -vv option to ssh to be more verbose when > you try to connect? > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list >
