On Thu, 2006-06-15 at 23:44 -0400, Ric Moore wrote: > I think Linux also has a problem recognizing drives set to cable > select instead of the Master / Slave pin settings. That's a hardware issue, with the drives themselves, not the OS. The drive is master or slave, set by the jumpers or the cable. If the drive is set, the OS doesn't care how, nor know how. If the drive does not get set properly by one method or the other, you have a crap drive. -- (Currently running FC4, occasionally trying FC5.) Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists.
