Re: azureus won't start with libgcj

[Peter Reed <mrdeadworry@xxxxxxxxxxxxxx>]

sean wrote:
> oldman wrote:
> > sean wrote:
> >
> > > Kevin Kofler wrote:
> > >
> > > > > Trying to run azureus-2.4.0.2 with libgcj-4.1.1-1.fc5 on fc5, amd64:
> > > >
> > > >
> > > >
> > > > Try azureus-0:2.4.0.3-0.20060529cvs_1.fc5 from Extras. I haven't 
> > > > tried it myself, but as it is in Extras, chances are it will work. :-)
> > > >
> > > >         Kevin Kofler
> > >
> > > Great idea.
> > >
> > > Now it starts, but I can't get it to connect. Says it's firewalled.
> > >
> > > I've set up iptables on the old laptop I use as a router. My machine 
> > > is AMD64:
> > >
> > > EXTIF=eth1
> > > AMD64_IP=10.10.8.1
> > > AZ_PORT=6881
> > >
> > > $IPT -t nat -A PREROUTING -p tcp -i $EXTIF --dport $AZ_PORT -j DNAT 
> > > --to-destination $AMD64_IP:$AZ_PORT
> > > $IPT -t nat -A PREROUTING -p udp -i $EXTIF --dport $AZ_PORT -j DNAT 
> > > --to-destination $AMD64_IP:$AZ_PORT
> > > $IPT -A FORWARD -p tcp -i $EXTIF --dport $AZ_PORT -j ACCEPT
> > > $IPT -A FORWARD -p udp -i $EXTIF --dport $AZ_PORT -j ACCEPT
> > >
> > > And bittorrent works.
> > >
> > > Any ideas??
> > >
> > > sean
> > Works fine for me (but I don't have a router or external firewall).  
> > I did notice that the latest Azureus doesn't use port 6881 as a 
> > default, so you might want to look at the Tools--->NAT/Firewall test 
> > to see which port it is using (I'm on the wrong machine, so I can't 
> > see which it is).
> > Or you can open the Tools -->Options tab and the first option is to 
> > set the incoming tcp/udp listen port.
> >
> > HTH
> >
> > Scott
>
> mine still used 6881. I tried changing to a new random number - 8499 - 
> at azureus and iptables. same result.
>
> (:
>
> sean
The new port number is 21734.  I had the same problem until I found that 
they had changed the port number.  Also make sure  your router is set up 
for both tcp and upd.
Peter