2006/6/2, Thomas Taylor <linxt@xxxxxxxxxxx>:
On Thursday 01 June 2006 15:16, Antonio Montagnani wrote:
> I told to my laptop to use shared printers (via Cup/IPP) connected to
> my desktop.
> When I send a test page from printer configuration tool nothing is
> printed and i get the following message.:
>
> 02/Jun/2006:00:05:16 +0200] Adding start banner page "none" to job 598.
> I [02/Jun/2006:00:05:16 +0200] Adding end banner page "none" to job 598.
> I [02/Jun/2006:00:05:16 +0200] Job 598 queued on "EpsonC70" by "root".
> W [02/Jun/2006:00:05:35 +0200] [Job 130] Network host '192.168.0.1' is
> busy, down, or unreachable; will retry in 30 seconds...
>
> I am lost as I have a twin similar system in the office where my
> laptop (192.168.0.5) can print to my desktop (192.168.0.1) (and both
> have iptables with exactly same rules ....no rule for CUP), and I
> can't get out of the problem.
>
> >From this point, what shall I look into??
>
> CUPS is always a pain for newbies...
> --
> Antonio Montagnani
> Skype : antoniomontag
CUPS has set up a que for your Epson C70 printer but it's not being addressed
properly.
Is this a network at your home or at your work?
If it's at home, are you trying to print to the printer at home or at work?
Please show contents of etc/cups/printers.conf, etc/hosts, etc/hosts/allow and
etc/hosts/deny
Tom
--
Tom Taylor
Linux user #263467
Federal Way, WA
Tnx TOM
My office network is o.k.
My home network has a desktop (192.168.0.1) that has two connected printers.
I added the second printer (a laser) about one week ago using the
printer configuration tool
Both printers work great from the desktop.The system is fully updated
with latest CUPS packages.
I suppose that I have to post configuration files from the desktop
(the printer server..)
My printers.conf:
# Printer configuration file for CUPS v1.2.1
# Written by cupsd on 2006-05-31 19:20
<Printer EpsonC70>
Info Epson Inkjet C-70
Location Epson Inkjet C-70
DeviceURI parallel:/dev/lp0
State Idle
StateTime 1149090838
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer ML-1610>
Info ML-1610
DeviceURI hal:///org/freedesktop/Hal/devices/usb_device_4e8_3268_3921BRJL304582___if0_printer_noserial
State Stopped
StateMessage Filter "ppmtospl2" for printer "ML-1610" not available:
No such file or directory
StateTime 1149090838
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<Printer ml-1610--1>
Info ml-1610--1
DeviceURI hal:///org/freedesktop/Hal/devices/usb_device_4e8_3268_3921BRJL304582___if0_printer_noserial
State Stopped
StateMessage Filter "ppmtospl2" for printer "ml-1610--1" not
available: No such file or directory
StateTime 1149090838
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
<DefaultPrinter Samsung>
Info Samsung
DeviceURI usb:/dev/usb/lp0
State Idle
StateTime 1149090838
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
I have also a printers.conf.O file:
# Printer configuration file for CUPS v1.2.1
# Written by cupsd on 2006-05-31 17:43
<Printer printer>
DeviceURI usb:/dev/usb/lp0
Location
Info
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
<Printer ml-1610--1>
DeviceURI hal:///org/freedesktop/Hal/devices/usb_device_4e8_3268_3921BRJL304582___if0_printer_noserial
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
<DefaultPrinter Samsung>
DeviceURI usb:/dev/usb/lp0
Location
Info
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
<Printer EpsonC70>
DeviceURI parallel:/dev/lp0
Location Epson Inkjet C-70
Info Epson Inkjet C-70
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
<Printer ML-1610>
DeviceURI hal:///org/freedesktop/Hal/devices/usb_device_4e8_3268_3921BRJL304582___if0_printer_noserial
Location
Info
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
My etc/hosts file is:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 Casa localhost.localdomain localhost
My etc/hosts.allow
#
# hosts.allow This file describes the names of the hosts which are
# allowed to use the local INET services, as decided
# by the '/usr/sbin/tcpd' server.
#
192.168.0.
I have already included 192.168.0. as a trial, no difference even if
it is empty!!!
My etc/hosts.allow
# hosts.deny This file describes the names of the hosts which are
# *not* allowed to use the local INET services, as decided
# by the '/usr/sbin/tcpd' server.
#
# The portmap line is redundant, but it is left to remind you that
# the new secure portmap uses hosts.deny and hosts.allow. In particular
# you should know that NFS uses portmap!
Tnx for help, I hope to solve the problem during this week-end
--
Antonio Montagnani
Skype : antoniomontag
