With best regards Tomas Larsson Sweden Verus Amicus Est Tamquam Alter Idem > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Tomas Larsson > Sent: Thursday, May 18, 2006 11:53 PM > To: 'For users of Fedora Core releases' > Subject: RE: FC4 And Dlink DWL-G630 WiFi card > > > To: For users of Fedora Core releases > > Subject: Re: FC4 And Dlink DWL-G630 WiFi card > > > > On 5/18/06, Tomas Larsson <[email protected]> wrote: > > > Think I found it. > > > > > > It seems that there is a native linux-driver avaible for > > this card As > > > far as I can tell it is rev E1 card. According to > > MadWiFi's homepage > > > it is using a RaLink chipset. > > > Which seems to be confirmed by the output from lspci. > > > > > > Now I have downloaded the tar-file (RT61) from RaLinks > > homepage, but > > > obviously it is source code. > > > > > > My question is then, is there anything more to be done, > apart from > > > compiling the driver, do I need to re-configure the > kernel or do I > > > need to recompile it. It is a standard stock FC4 DVD-install. > > > I guess I need to do a yum update first. > > > Any recommendations for installing the TAR-file, compiling and > > > installing the driver would help much. > > > > > > > > > > > > With best regards > > > > > > Tomas Larsson > > > Sweden > > > > > > Verus Amicus Est Tamquam Alter Idem > > > > > Now, the driver is compiled, but I'm supposed to edit > /etc/modules.conf > > Obviously it has a different name and location in FC, but > which and where > In the readme, it says that the config-file (a text-file) should mbe in bin-format, what is that?