Oddly enough, updating to the latest beta version BIOS of my
motherboard [K8N4-E Deluxe v.1011.3] fixed this problem. I suspected
a bios problem after I tried to upgrade to FC5 and encountered the
same exact issues. Updated the BIOS and no problems what-so-ever.
This was when I upgraded to FC5 doing a clean install, so I can't
verify that this would work for FC4, but I'm thinking it should if
there is a BIOS update for you motherboard.
Hope this helps.
-Ubence
On May 1, 2006, at 11:02 PM, Michael Thayer wrote:
Hello,
Did you solve this problem? I have a similar problem and solved it
with the kernel parameter "pci=nommconf".
Regards,
Michael
With Kernel 2.6.13-1.1532_FC4, below [snipped from /var/log/Messages]
is reported at about the time at boot
Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804: IDE controller at PCI
slot 0000:00:06.0
Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804: chipset revision 242
Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804: not 100% native mode:
will probe irqs later Nov 29 18:19:46 fc4-64 kernel: NFORCE-CK804:
BIOS didn't set cable bits correctly. Enabling workaround. Nov 29
18:19:46 fc4-64 kernel: NFORCE-CK804: BIOS didn't set cable bits
correctly. Enabling workaround. Nov 29 18:19:46 fc4-64 kernel:
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller Nov 29 18:19:46
fc4-64 kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA,
hdb:DMA Nov 29 18:19:46 fc4-64 kernel: ide1: BM-DMA at 0xf008-0xf00f,
BIOS settings: hdc:DMA, hdd:DMA
Nov 29 18:19:46 fc4-64 kernel: hda: ST320011A, ATA DISK drive
Nov 29 18:19:46 fc4-64 kernel: hdb: SONY CD-RW CRX230ED, ATAPI CD/DVD-
ROM drive
Nov 29 18:19:46 fc4-64 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 29 18:19:46 fc4-64 kernel: hdc: ST360020A, ATA DISK drive
Nov 29 18:19:46 fc4-64 kernel: hdd: IC35L080AVVA07-0, ATA DISK drive
Nov 29 18:19:47 fc4-64 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 29 18:19:47 fc4-64 kernel: hda: max request size: 128KiB
Nov 29 18:19:47 fc4-64 kernel: hda: 39102336 sectors (20020 MB) w/
2048KiB Cache, CHS=38792/16/63, UDMA(100)
Nov 29 18:19:47 fc4-64 kernel: hda: cache flushes not supported
Nov 29 18:19:47 fc4-64 kernel: hda: hda1 hda2 hda3
With removing the quiet from grub for both Kernel 2.6.14-1.1637 and
2.6.14-1.1644, I get the following:
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling
workaround.
NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling
workaround.
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
NFORCE-CK804 simplex device: DMA disabled
ide1: NFORCE-CK804 Bus-Master DMA disabled (BIOS)
hda: ST320011A, ATA DISK drive
hdb: SONY CD-RW CRX230ED, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ST360020A, ATA DISK drive
hdd: IC35L080AVVA07-0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63,
UDMA(100)
hda: cach flushes not supported
hda:<4>hda: dma_timer_expiry: dma status == 0xff
hda: dma_timer_expiry: dma status == 0xff
hda: dma_timer_expiry: dma status == 0xff
hda: dma_timer_expiry: dma status == 0xff
hda: dma_timer_expiry: dma status == 0xff
.
.
.
Looks like it has something to do with the secondary onboard IDE
controller? I'm running FC4_64 if that helps as well.
-Ubence
On Nov 30, 2005, at 09:57 AM, Dave Jones wrote:
On Tue, Nov 29, 2005 at 06:29:03PM -0800, Ubence Quevedo wrote:
I get the following error whenever I boot into Kernel 2.6.14-1.1637
or the just released 2.6.14-1.1644:
Decompressing Linux...done.
Booting the kernel.
PCI: Cannot allocate resource region 4 of device 0000:00:06.0
PCI: Cannot allocate resource region 4 of device 0000:00:08.0
PCI: Cannot allocate resource region 4 of device 0000:01:00.0
PCI: Failed to allocate I/O resource #4:4000 10000 for 0000:00:08.0
PCI: Error while updating region 0000:00:06.0/4 (00001001 != 0000f001)
PCI: Failed to allocate mem resource #1:40000000 c0000000 for
0000:01:00.0
My system is a AMD Athlon 64 3000+ CPU installed in a Asus K8N4-E
Deluxe motherboard with an Asus GeForce 6200 PCIe video card. I also
have an Intel Pro 100 PCI network card installed. Has anyone else
run into this issue?
Can you remove the 'quiet' from the boot command line, and see
what the last few lines it mentions are ?
Dave
