On 5/2/06, lostson <lostson@xxxxxxxxxxxxxxxxx> wrote:
> Hello
> I am using FC5 with a nvidia gforce 5700xp. I also use
twinview and I
> use the kmod-nvidia from livna. When setting up my twinview
like I have
> always done, I keep my xorg.conf from a backup from FC4 and It
doesn't
> change much. I set it up with my 1280x1024 on both screens and
it
> launches ok and all. The problem I am having is when going to
System -->
> Preferences --> Scree Resolution in Gnome it says Im running
2560x1024
> which is right but the refresh rate says 50 Hz. I don't know
why this is
> doing this I have set my refresh rates in my xorg.conf it
should be 60
> Hz. Does anyone know if there is a bug in the Screen
Resolution app ? Or
> is there something wrong with the nvidia driver or kmod-nvidia
module
> from livna. The reason I ask is my eyes start to kill me after
a hour or
> 2 and I have never had this problem before. I could sit here
for 12
> horus and it would never bother me. So i'm looking for ideas
and
> thoughts, thanks.
What does your X log say?
I believe this is the relevant portion
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5700
Ultra at
(--) NVIDIA(0): PCI:2:0:0:
(--) NVIDIA(0): Samsung SyncMaster (CRT-0)
(--) NVIDIA(0): CRT-1
(--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400 MHz maximum
pixel clock
(--) NVIDIA(0): CRT-1: 400 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024_60.00,1280x1024_60.00"
(II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024
(--) NVIDIA(0): DPI set to (90, 96); computed from "UseEdidDpi"
X config option
(--) Depth 24 pixmap format is 32 bpp
Hopefully this helps, I dont think I am getting 60 Hz though ?
--
LostSon
http://www.lostsonsvault.org
Attachment:
signature.asc
Description: This is a digitally signed message part
