On Sun, 2006-04-23 at 09:29 -0600, Charles Curley wrote: > On Sun, Apr 23, 2006 at 10:31:49PM +0800, Stephen Liu wrote: > > Hi Charles, > > > > I tested the USB thumb drives on a FC3 32bit box. I haven't got FC5 > > 32bit running. > > > > > > AVIXE 1G > > ======== > > # ps -ef | grep usb > > root 4555 1 0 21:39 ? 00:00:00 [usb-storage] > > root 4807 4772 0 21:48 pts/3 00:00:00 grep usb > > > > > > # dmesg | grep usb > > usbcore: registered new driver usbfs > > usbcore: registered new driver hub > > usbcore: registered new driver hiddev > > usbcore: registered new driver usbhid > > drivers/usb/input/hid-core.c: v2.01:USB HID core driver > > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > > usb 4-1: new high speed USB device using ehci_hcd and address 2 > > usb-storage: device found at 2 > > usb-storage: waiting for device to settle before scanning > > usbcore: registered new driver usb-storage > > usb-storage: device scan complete > > * * * END * * * > > Curious, either it didn't show the plug-in information, like what I > showed you recently, or you didn't copy it in. No big deal, as the > fdisk results show what we need. > He did not show the info you asked for. He does a 'grep usb' and only shows those lines, not everything related. > > > > > > # fdisk -l > > > > Disk /dev/sda: 1007 MB, 1007419392 bytes > > 31 heads, 62 sectors/track, 1023 cylinders > > Units = cylinders of 1922 * 512 = 984064 bytes > > > > Device Boot Start End Blocks Id System > > /dev/sda1 1 204 196013 6 FAT16 > > /dev/sda2 205 1018 782254 83 Linux > > /dev/sda3 1019 1023 4805 83 Linux > > * * * End * * * > > Obviously it's there. > > > > > > > > > AVIXE 512M > > ========== > > > > # ps -ef | grep usb > > root 4946 1 0 21:49 ? 00:00:00 [usb-storage] > > root 5101 4772 0 21:49 pts/3 00:00:00 grep usb > > > > > > # dmesg | grep usb > > usbcore: registered new driver usbfs > > usbcore: registered new driver hub > > usbcore: registered new driver hiddev > > usbcore: registered new driver usbhid > > drivers/usb/input/hid-core.c: v2.01:USB HID core driver > > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > > usb 4-1: new high speed USB device using ehci_hcd and address 2 > > usb-storage: device found at 2 > > usb-storage: waiting for device to settle before scanning > > usbcore: registered new driver usb-storage > > usb-storage: device scan complete > > usb 4-1: USB disconnect, address 2 > > usb 4-1: new high speed USB device using ehci_hcd and address 3 > > usb-storage: device found at 3 > > usb-storage: waiting for device to settle before scanning > > usb-storage: device scan complete > > * * * End * * * > > > > > > # fdisk -l > > > > > > > Disk /dev/sda: 503 MB, 503709696 bytes > > 64 heads, 32 sectors/track, 480 cylinders > > Units = cylinders of 2048 * 512 = 1048576 bytes > > > > Device Boot Start End Blocks Id System > > /dev/sda1 * 1 287 293872 6 FAT16 > > /dev/sda2 288 250000 255706112 83 Linux > > Partition 2 has different physical/logical endings: > > phys=(1023, 63, 32) logical=(249999, 63, 32) > > * * * End * * * > > Again, obviously there. > > > > > > > > > > Have you got a 32 bit machine you can look at the device's ID with > > > lsusb and compare that to the results on your 64 bit machine? What > > > you > > > want is the ID column, something like 0c76:0005 in: > > > > > > Bus 004 Device 003: ID 0c76:0005 JMTek, LLC. USBdisk > > > > 1G > > === > > # lsusb > > Bus 006 Device 001: ID 0000:0000 > > Bus 005 Device 001: ID 0000:0000 > > Bus 004 Device 004: ID 0457:0151 Silicon Integrated Systems Corp. > > Bus 004 Device 001: ID 0000:0000 > > Bus 003 Device 001: ID 0000:0000 > > Bus 002 Device 001: ID 0000:0000 > > Bus 001 Device 001: ID 0000:0000 > > * * * End * * * > > > > > > 512M > > ==== > > # lsusb > > Bus 006 Device 001: ID 0000:0000 > > Bus 005 Device 001: ID 0000:0000 > > Bus 004 Device 005: ID 0457:0151 Silicon Integrated Systems Corp. > > Bus 004 Device 001: ID 0000:0000 > > Bus 003 Device 001: ID 0000:0000 > > Bus 002 Device 001: ID 0000:0000 > > Bus 001 Device 001: ID 0000:0000 > > * * * End * * * > > > > Both seems the same. > > Right. The left hand value (0457) is the manufacturer's ID, which will > be the same for all of the manufaturer's products. The right hand one > (0151) is for the specific product. I think they should have changed > it so their own manufacturing processes could tell them apart, but > that doesn't affect us here. > > Anyway, the things are clearly working correctly under FC3. I've seem > other USB devices work on one version of Linux but not another. So my > guess is that there is a bug, either in FC5 or in FC5_64. It would > help to have an FC5_32 machine to narrow things down. We'll see what > lsusb reveals. > > > > > > > > On FC5_64 box > > # which lsusb > > /usr/bin/which: no lsusb in > > (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) > > > > Neither "yum search lsusb" found this package. Please advise which > > package is needed? TIA > > Odd. "yum provides lsusb" got no hits. It should have returned > "usbutils", which is the package you want. I wonder if that's a bug in > yum? > > BTW, you could have gone to the FC3 box and run "rpm -qf $(which > lsusb)" to get the package name, but you didn't know that. > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
