On 4/22/06, Mikael Rasmussen <redhat@xxxxxx> wrote: > Kam Leo skrev: > On 4/21/06, Mikael Rasmussen <redhat@xxxxxx> wrote: > > > Kam Leo skrev: > On 4/21/06, Mikael Rasmussen <redhat@xxxxxx> wrote: > > > I have updated my FC4 to FC5. > > At the first reboot, it started as it should, but was a bit slow in > graphics. I solved some problems with yum using FC4 repos, and the > entire machine is now updated (Except for an old known problem on > gstreamer). > > The problem is, that the X server won't start. I have tried the following: > > 1. boot to runlevel 3, and run "system-config-display > "couldn't start X server on Card 0" > 2. boot to runlevel 3, and run "startx" > "couldn't start X server on Card 0" > 3. removed xorg-x11-server-Xorg and all related packages,and reinstalled > it all > Still same result as 1 & 2. > > Can anyone tell me what I am doing wrong - I am desperate? > > > Mikael > > > You did not state what make of graphics adapter that you have > installed. There are problems with the as shipped kernel and drivers > for both Nvidia and ATI. You need to upgrade if you have either type > of adapter. > > > OK. > > Any suggestions to a website or a yum package? > > I have a feeling, that a have crawled through it all > > > Mikael > > > There are lots of updates since FC5 was released. You can do an update > of everything that you have installed or just an update of the kernel > and xorg.. > > > No something else must be wrong. > > I have installed the latest kernel (2.6.16-1.2096_FC5) > I have installed the latest NVIDIA driver (NVIDIA-Linux-x86-1.0-8756) > >From Livna or Nvidia? > All I get is a black screen, with a blinking dash in the top left corner, > and a big white mousecursor. > > I have even tried to reinstall without any luck > > Any ideas are welcome > > Mikael >
