On Sunday 26 February 2006 05:48, Clodoaldo Pinto wrote: > I can't mount an exported server share. > > I have googloed this message error and found lots of posts. Tried all > the pointed solutions and still can't mount it. > > The server is fc5t3 and the client fc4. > > >From the client: > > # mount -t nfs4 10.1.1.103:/home /mnt/s0 > mount: permission denied > > Server config: > > Both /etc/hosts.allow and /etc/hosts.deny are empty > > # cat /etc/exports > /home 10.1.1.0/24(ro,sync) > > The permissions in /home are > drwxr-xr-x 3 root root 4096 Feb 24 09:49 home > > # rpcinfo -p > program vers proto port > 100000 2 tcp 111 portmapper > 100000 2 udp 111 portmapper > 100024 1 udp 32768 status > 100024 1 tcp 55647 status > 1073741824 1 tcp 50897 > 100011 1 udp 793 rquotad > 100011 2 udp 793 rquotad > 100011 1 tcp 796 rquotad > 100011 2 tcp 796 rquotad > 100003 2 udp 2049 nfs > 100003 3 udp 2049 nfs > 100003 4 udp 2049 nfs > 100003 2 tcp 2049 nfs > 100003 3 tcp 2049 nfs > 100003 4 tcp 2049 nfs > 100021 1 udp 32776 nlockmgr > 100021 3 udp 32776 nlockmgr > 100021 4 udp 32776 nlockmgr > 100021 1 tcp 44562 nlockmgr > 100021 3 tcp 44562 nlockmgr > 100021 4 tcp 44562 nlockmgr > 100005 1 udp 806 mountd > 100005 1 tcp 809 mountd > 100005 2 udp 806 mountd > 100005 2 tcp 809 mountd > 100005 3 udp 806 mountd > 100005 3 tcp 809 mountd > > > At the client: > > # rpcinfo -p > program vers proto port > 100000 2 tcp 111 portmapper > 100000 2 udp 111 portmapper > 100024 1 udp 32768 status > 100024 1 tcp 49469 status > 100011 1 udp 766 rquotad > 100011 2 udp 766 rquotad > 100011 1 tcp 769 rquotad > 100011 2 tcp 769 rquotad > 100003 2 udp 2049 nfs > 100003 3 udp 2049 nfs > 100003 4 udp 2049 nfs > 100003 2 tcp 2049 nfs > 100003 3 tcp 2049 nfs > 100003 4 tcp 2049 nfs > 100021 1 udp 32777 nlockmgr > 100021 3 udp 32777 nlockmgr > 100021 4 udp 32777 nlockmgr > 100021 1 tcp 34287 nlockmgr > 100021 3 tcp 34287 nlockmgr > 100021 4 tcp 34287 nlockmgr > 100005 1 udp 778 mountd > 100005 1 tcp 781 mountd > 100005 2 udp 778 mountd > 100005 2 tcp 781 mountd > 100005 3 udp 778 mountd > 100005 3 tcp 781 mountd > > > Regards, Clodoaldo Pinto What are the permissions on fc3 /mnt/s0? It may be set as only root. HTH, Tom -- Tom Taylor Linux user #263467 Federal Way, WA
