Gene Heskett kirjoitti viestissään (lähetysaika torstai, 23. helmikuuta 2006 03:13): > On Wednesday 22 February 2006 19:04, Markku Kolkka wrote: > >Blue connector goes to motherboard, the black connector at > > cable end is for the master and the grey connector in the > > middle is for the slave. > > Hummm, I've been told the black end is the mobo end. Lemme > look at mine. The color coding is specified in the ATA standard: http://t13.org/project/d1410r3b-ATA-ATAPI-6.pdf Annex A.1.2 80-conductor cable assembly using the 40-pin connector: "The System Board connector shall have a blue base and a black or blue retainer. The Device 0 Connector shall have a black base and a black retainer. The Device 1 Connector shall have a gray base and a black or gray retainer." -- Markku Kolkka markku.kolkka@xxxxxx
