azeem ahmad wrote:
From: Les Mikesell <lesmikesell@xxxxxxxxx>
Reply-To: For users of Fedora Core releases <fedora-list@xxxxxxxxxx>
To: For users of Fedora Core releases <fedora-list@xxxxxxxxxx>
Subject: Re: OT: router?
Date: Thu, 26 Jan 2006 11:12:42 -0600
On Thu, 2006-01-26 at 10:56, azeem ahmad wrote:
> hi list
> i got 6 different networks that are on ranges
> 192.168.0.0/24
> 192.168.1.0/24
> 192.168.2.0/24
> 192.168.3.0/24
> 192.168.4.0/24
> 192.168.5.0/24
> 192.168.6.0/24
> i want them to communicate each other selectively, mean i want that
> 192.168.0.0/24 network communicate with all other networks and other
> networks can communicate with it, but all others networks must not
be able
> to communicate with each other. i think the ultimate solution is
using a
> router.
> m i right?
> and an other thing i want a cheaper solution, can u people tell me
about any
> cheaper and good router
Any Linux box can act as a router - you just need to cram
enough NIC cards in to handle all the networks. Or split
the job among a few machines that reside on the 192.168.0.0
net.
--
i know
but in fact i dont want to use a Linux machine, instead i want to use a
HW router
Technically there is no such thing though Cisco seems to be one
of the closest to approach that. I think I know what you mean
though (not a PC).
If you're talk for home use then a WRT54GL with OpenWRT, HyperWRT
or Sveasoft software should be able to handle that. You may need
to add real 802.1q support (real VLANs) and a switch that supports
it. Or just use virtual interfaces eth0, eth0:1, eth0:2 ... eth0:5
and the single interface (I normally don't go past eth0:2).
For a business setup then skip the WRT and get yourself a big
router. The WRT isn't meant to support ~1500 nodes. Since your
asking I think you need to consider talking to someone who can
design your network properly.
--
Linux Home Automation Neil Cherry ncherry@xxxxxxxxxxx
http://www.linuxha.com/ Main site
http://linuxha.blogspot.com/ My HA Blog
http://home.comcast.net/~ncherry/ Backup site
