Andy Pieters wrote: >> The instruction manual says to connect to it on 192.168.1.1 which >> would be the 255.255.0.0 subnet right? Jeff Vian: > No. The default netmask for anything in the 192.168.X.X range is > 255.255.255.0. Those are class C net spaces. Can be done either way... You might have two distinct subnets using 192.168.0.x and 192.168.1.x, for instance, so you would use 255.255.255.0 as the netmask to determine the difference between local and remote networks (i.e. what has to go through the gateway, and what doesn't). You might have a huge network which uses 192.168.0.1 to 192.168.255.253, or addresses throughout that range, even if you don't use every possible address in that range, so you'd use 255.255.0.0 to put them all on the same network. -- Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists.
