CodeHeads wrote: >>>> I had a networked printer from linux to linux working. The print >>>> server is running FC4 and the laptop was running FC4 also. I redid >>>> the laptop to FC2. and now I am getting errors of "Unable to get >>>> printer status Client-error-forbidden". A prior message gave you just about all that you should need to get printing working. First, on the machine that the printer is actually connected to, set up the printer so that it works locally. The last time I did this I didn't use the printer configuration GUI, I used the CUPs web interface: <http://127.0.0.1:631/> Secondly, on the client machines all you should need to do is open the /etc/cups/client.conf file in an text editor and enter in the address for the print server. Then they'll just use the server, with whatever the print server is configured to do. They don't care where the printer is. Thirdly, you may need to make sure that your firewall isn't getting in the way (trust the network between the two machines). Fourthly, you *may* need to modify the /etc/cups/cupds.conf file on the server to allow the local network to use it. I seem to recall having to do this myself. e.g. Adding some: Allow From @LOCAL configuration options in appropriate sections, such as inside: <Location /> Order Deny,Allow Deny From All Allow From 127.0.0.1 Allow From @LOCAL </Location> The bottom of that file looks like this, on my server (note the warning): # # End of "$Id: cupsd.conf.in,v 1.17 2005/01/03 19:29:45 mike Exp $". # # Lines below are automatically generated - DO NOT EDIT Browsing On BrowseProtocols cups BrowseOrder Deny,Allow BrowseAllow from @LOCAL Listen 127.0.0.1:631 -- Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists.
