hi all
this might not be any use as FC4 and nvida bin's but my xconfig works
for twinview and is as follows
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "device1"
Screen "screen1" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
Identifier "monitor1"
VendorName "Generic"
ModelName "1024x768 @ 60 Hz"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 60.0
Gamma 1.9 2.1 2.1
ModeLine "1024x480" 65.0 1024 1032 1176 1344 480 488 494 563 -hsync
-vsync
ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "TwinView"
Driver "nvidia"
BoardName "NVIDIA GeForce FX (generic)"
Option "DPMS"
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "30"
Option "CursorShadowYOffset" "4"
Option "CursorShadowXOffset" "6"
Option "IgnoreEDID" "1"
Option "backingstore"
Option "NvAGP" "1"
Option "TwinView" "1"
Option "VertRefresh" "CRT-0:50-60; CRT-1: 50-60"
Option "HorizSync" "CRT-0: 30-48.5; CRT-1: 30-48.5"
Option "Metamodes" "1024x768,1024x768; 800x600,800x600;
640x480,640x480; 1024x768,NULL;800x600,NULL; 640x480,NULL"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "CRT, CRT"
EndSection
Section "Screen"
Identifier "screen1"
Device "TwinView"
Monitor "monitor1"
DefaultDepth 24
SubSection "Display"
Virtual 2048 768
Depth 8
EndSubSection
SubSection "Display"
Virtual 2048 768
Depth 15
EndSubSection
SubSection "Display"
Virtual 2048 768
Depth 16
EndSubSection
SubSection "Display"
Virtual 2048 768
Depth 24
EndSubSection
EndSection
sorry its huge but did not want to edit it in case there is some voodoo
going on!!
scott
http://witt0191.blogspot.com/
Peter Boy wrote:
Am Donnerstag, den 03.11.2005, 10:52 -0800 schrieb Brian D. McGrew:
Greetings all:
I'm trying to get dual monitors working with FC3. I've got an ATI X300
card with VGA and DVI and two analog Viewsonic monitors hooked up. Both
monitors are working but they're mirroed. I need to run them in
xinerama modem or separate desktop mode. What am I missing? My
xorg.conf file is attached!
Here are the relevant sections of my xorg.conf which works perfectly in
xinerama:
Section "ServerLayout"
Identifier "ATI dual head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
.....
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x1024"
# Synchronisation in Digital Mode
HorizSync 31.5 - 67.0
VertRefresh 50.0 - 75.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "ATI corp."
BoardName "ATI Radeon 9600"
# Option "AGPFastWrite" "on"
Option "MergedFB" "on"
Option "CRT2Position" "RightOf"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
Virtual 2560 1024
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
