Hello Aaron,
I know this was handled *somewhere*, but I can't find it. I am trying to
use the Alsa mixer to pipe audio from a weather radio into my computer to
broadcast out on a web server. After the FC 4 upgrade, there's no
sound...the input appears to be at zero. I have been going through the
Alsa mixer over the last half hour, trying to get it working, to no avail.
can someone help me out here? Thanks!
Which channel are you using for the radio input?
I am using the line-out from the radio to the line-in to my computer. It
worked 4 hours ago, before I upgraded FC 1 to FC 4.
At the bottom of that
channel and the output channel you are using do you fins MM or 00? It
should be 00, and hit M to change it if it is MM. What level do you
have in these channels, and have you properly adjusted the channels
with the arrow keys? These things normally are the difference between
sound and silence.
I used aumix (which shows all is well), and Alsa. I can hear system
sounds, bells and dings and the like, but no weather radio coming form
line in on the PC. I verified that my current install of icecast and
darkice are working.
*******************************************************************************
Gilbert Sebenste ********
(My opinions only!) ******
Staff Meteorologist, Northern Illinois University ****
E-mail: sebenste@xxxxxxxxxxxxxxxxxxxxx ***
web: http://weather.admin.niu.edu **
Work phone: 815-753-5492 *
*******************************************************************************
