On 26/10/05, Andrew Couture <relicsrage@xxxxxxxxx> wrote:
All my cameras come up as sdb*. When the cards
are in a reader...they come up as sdb**.
It might be hal or messagebus or other things....
but I have had problems with hal, and it wasn't like
what you described. Let me know if you get it work.
kwhiskers wrote:
>
>
> On 26/10/05, *Andrew Couture* <relicsrage@xxxxxxxxx
> <mailto:relicsrage@xxxxxxxxx >> wrote:
>
> OK, do you have gphoto2 installed?
> If you have gthumbs installed, gphoto2 is installed.
> I have two digital cameras, one Minolta DV and a Canon G5.
> Both have worked flawlessly with FC2/3/4.
>
> I am using FC4 with newest kernel.
> Example...i plug in camera, gthumbs opens and asks 'import photos?'
>
> Assuming you have FC4 and the newest kernel, 'yum install gthumbs'
> or apt-get or whatever you poison.
>
> Make sure you remove your 'rules' and other changes (put everything
> back as original) then plug in your camera.
>
> If you want,envoke gphoto2 from the CLI, or man gphoto2 for more info.
> Check out the home page for gphoto2 for more information on your
> camera (optional).
>
> I have not had to play with 'fstab' or create 'local.rules' for udev
> or screw with any permissions. It works out of the box, first time
> every time for me. I have FC4 installed on five systems here at home,
> and it just works on every computer.
>
> andy
>
>
>
> kwhiskers wrote:
> >
> >
> > On 25/10/05, *Andrew Couture* <relicsrage@xxxxxxxxx
> <mailto:relicsrage@xxxxxxxxx>
> > <mailto: relicsrage@xxxxxxxxx <mailto:relicsrage@xxxxxxxxx>>> wrote:
> >
> > First off, what version of FC are you using?,
> >
> > do you have gphoto or gphoto2 installed?
> >
> > do you have gThumb installed?
> >
> > You can mount the thing manually, your almost there...
> >
> >
> > kwhiskers wrote:
> > > Problem: I would like to have my camera be mounted
> automatically
> > when I
> > > plug it into its usb cable.
> > > NB: Although it is plugged into the usb, it is seen as a
> scsi
> > device.
> > >
> > > I have a line in fstab:
> > >
> >
> /dev/sda1 /media/usbdisk auto pamconsole,exec,noauto,managed
> > 0 0
> > >
> > > I have made a dimage.rules file for udev:
> > > BUS="scsi", SYSFS{model}="DiMAGE F100", KERNEL="sd?1",
> > SYMLINK="camera"
> > >
> > > I got some of this information by entering the command:
> > > udevinfo -a -p 'udevinfo -q path -n /dev/sda1'
> > >
> > > This is the output I get:
> > >
> > > device '/sys/block/sda/sda1' has major:minor 8:1
> > > looking at class device '/sys/block/sda/sda1':
> > > SUBSYSTEM=="block"
> > > SYSFS{dev}=="8:1"
> > > SYSFS{size}=="493979"
> > > SYSFS{start}=="101"
> > > SYSFS{stat}==" 163 163 0 0"
> > >
> > > follow the "device"-link to the physical device:
> > > looking at the device chain at '/sys/devices/pci0000:00/0000
> > > :00: 1f.2/usb1/1-2/1-2:1.0/host2/target2:0:0/2:0:0:0':
> > > BUS=="scsi"
> > > ID=="2:0:0:0"
> > > DRIVER=="sd"
> > > SYSFS{device_blocked}=="0"
> > > SYSFS{iocounterbits}=="32"
> > > SYSFS{iodone_cnt}=="0x2b"
> > > SYSFS{ioerr_cnt}=="0x0"
> > > SYSFS{iorequest_cnt}=="0x2b"
> > > SYSFS{max_sectors}=="240"
> > > SYSFS{model}=="DiMAGE F100 "
> > > SYSFS{queue_depth}=="1"
> > > SYSFS{queue_type}=="none"
> > > SYSFS{rev}=="1.00"
> > > SYSFS{scsi_level}=="3"
> > > SYSFS{state}=="running"
> > > SYSFS{timeout}=="30"
> > > SYSFS{type}=="0"
> > > SYSFS{vendor}=="MINOLTA "
> > >
> > > couldn't open device directory
> > >
> > > Perhaps of note is the fact that the number on the line
> > SYSFS{stat} is
> > > not the same every time
> > > Also, the note at the end of the output for this command:
> > "couldn't open
> > > device directory"
> > > Is that normal? Why couldn't directory be opened? When I
> manually
> > mount,
> > > it opens just fine.
> > >
> > > When I plug in the camera:
> > > - the modules are loaded automatically (verified with tail
> > messages, etc)
> > > - the aforementioned line appears in fstab
> > > - /dev/sda1 is created
> > > - a link /dev/camera --> /dev/sda1 is created
> > > - /media/usbdisk is created
> > >
> > > However, the camera is not mounted and I have to do so
> manually :-(
> > >
> > > When I turn off the camera:
> > > - /media/usbdisk disappears, but only after a very long
> time (in
> > a few
> > > instances it didn't disappear and on next boot, when I
> plugged in the
> > > camera again, /media/usbdisk1 was created, in addition to the
> > > pre-existing /media/usbdisk from the previous session)
> > > - the line in fstab also disappears (I would have
> preferred to have
> > > /media/camera, but usbdisk appears no matter what I write in
> > fstab, so
> > > instead of fighting it, I decided that it will have to do,
> unless
> > > someone knows why...)
> > >
> > > Does anyone know how to get this working? Help would be much
> > appreciated
> > >
> >
> > --
> > fedora-list mailing list
> > fedora-list@xxxxxxxxxx <mailto:fedora-list@xxxxxxxxxx>
> <mailto:fedora-list@xxxxxxxxxx <mailto:fedora-list@xxxxxxxxxx>>
> > To unsubscribe:
> https://www.redhat.com/mailman/listinfo/fedora-list
> >
> >
> > You said I'm almost there, but actually, I'm exactly where I
> started, 3
> > days ago. I have learned a lot since then, but nothing that makes
> any
> > difference to the problem at hand.
> >
>
> --
> fedora-list mailing list
> fedora-list@xxxxxxxxxx <mailto:fedora-list@xxxxxxxxxx>
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>
>
> Thanks, I will try this when I get home in 3 hours.
>
> I suspect, though, that your cameras are not scsi mass storage cameras,
> hence are recognized by gphoto out of the box. Nevertheless, I will try.
>
> I have done quite a lot of reading, and I have come to the conclusion
> that the real problem is HAL. I have to set up the .fdi file so that the
> mass storage device gets automounted.
>
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Nope, I didn't get it working like it's supposed to. I took out the udev rules, like you suggested. Now I'm back to the beginning, before I started makig changes. I plug in the camera, the modules get loaded, /media/usbdisk is created, /dev/sda and /dev/sda1 are created... but the camera is not mounted like it's supposed to be. I have to manually mount it.
