At 7:21 PM -0400 10/25/05, Bruce Feist wrote: >Tony Nelson wrote: > >>At 5:49 PM -0400 10/24/05, Bruce Feist wrote: >> ... >> >> >>Boot from the install CD and run memtest from the menu. >> >I created a memtest-86 3.2 boot CD, and have been running it for over 25 >hours so far. It's gone through 82 passes with 0 errors. > >I think the memory is OK. Probably. The power supply is the next thing. Disconnecting the extra disk drives should be enough lightening of the load. Also, if you have a voltmeter you could measure the voltages at the motherboard connector. The voltages should be the same with and without the disk drives. An Oscilloscope would be better, to look for ripple or dropouts. ____________________________________________________________________ TonyN.:' <mailto:tonynelson@xxxxxxxxxxxxxxxxx> ' <http://www.georgeanelson.com/>
