On Thu, 2005-10-20 at 22:19 +0200, Alexander Dalloz wrote: > Am Do, den 20.10.2005 schrieb tlc um 20:40: > > No HTML formatted mails to this list please. > sorry bout that .. > > I have an onboard PDC20378 (FastTrak 378/SATA 378) set in IDE RAID > > mode. ( I have tried it in IDE non RAID as well ) and although linux > > finds the controller an loads the sata_promise driver for it, there > > are no devices detected attached to the card. > > It is a BIOS supported software RAID controller chip (aka fake RAID / > win-RAID). > yes, fake raid, so I know I am going to have to make it a software raid under linux. But I can not even see the devices even if I ( in the BIOS ) choose the IDE option instead of the RAID option. > > Asus P4P800 Deluxe, 2GB,P43.0E > > > > Booting off an SATA drive, a CD and a DVDR drive on the secondary IDE. > > The IDE ports are set in compatibility mode, secondary PATA + SATA > > > > I have to IDE drives on the promise controller and the promise BIOS > > sees both drives and created a RAID0 > > You seem to like living on the risky edge. I wouldn't say risky edge .. but the edge ... > > > I am running a 2.6.11.12 kernel due to a win4lin SMP issue, but from > > what I read the problem with this card was already fixed before > > 2.6.11.x > > I suggest you ask on the list dedicated to dmraid: > > https://listman.redhat.com/mailman/listinfo/ataraid-list > > I think you will get better feedback from there, as the author of dmraid > answers there too. > thanks for the advice ... will do > Alexander > > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
