Fedora Users — update to kernel 2.6.13 -> hang on boot

update to kernel 2.6.13 -> hang on boot

Date Prev

Date Next

Thread Prev

Thread Next

Date Index

Thread Index

Hi,

I updated kernel from 2.6.11 to 2.6.13 (with yum).
This message occurs on boot (and computer hangs):

---
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
---

Output from lspci -v:

--- cut -----
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
        I/O behind bridge: 00000000-00000fff
        Memory behind bridge: 00000000-000fffff
        Prefetchable memory behind bridge:
0000000000000000-0000000000000000
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
        Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
        Capabilities: [90] #0d [0000]
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel
        Capabilities: [180] Unknown (5)
--- cut -----

Very unstable behaviour (is this really stable kernel?)
Any workaround?

hardware: HP nx8220 notebook.

Thanks very much, pf