On Wednesday 14 September 2005 13:44, barophobia wrote: > Hello, > > I found this in my LogWatch email from last night... > > --------------------- Kernel Begin ------------------------ > > WARNING: Kernel Errors Present > EXT3-fs error (device sdc1): e...: 2 Time(s) > > ---------------------- Kernel End ------------------------- > > ...and now my /home partition seems to be mounted read only. > > Here is /etc/fstab: > > LABEL=/ / ext3 defaults 1 1 > LABEL=/boot /boot ext3 defaults 1 2 > none /dev/pts devpts gid=5,mode=620 0 0 > none /dev/shm tmpfs defaults 0 0 > LABEL=/home /home ext3 defaults 1 2 > none /proc proc defaults 0 0 > none /sys sysfs defaults 0 0 > LABEL=/tmp /tmp ext3 noexec,nosuid 1 2 > LABEL=/usr /usr ext3 defaults 1 2 > LABEL=/usr/local /usr/local ext3 defaults 1 2 > LABEL=/var /var ext3 defaults 1 2 > LABEL=SWAP-sdc5 swap swap defaults 0 0 If your drive/controller support smart try smartctl and check your drive that way. Also run dmesg and look in /var/log/messages for the complete output of your messages. Peter.
