Greg Trounson wrote:
Gidday,
I have a motherboard with an onboard Mach64 chip:
01:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
I am using this with a 17" 1280x1024 LCD panel.
Now when I launch X.Org using the recommended 'ati' driver, any screen
updates are terribly slow, not only for 3D but also 2D. Just scrolling
a web browser window is unbearably slow (~3fps). Switching to the vesa
driver reveals that the graphics chip is quite fast, so the ati driver
is clearly defective.
The problem with the VESA driver, however is that it doesn't recognise
1280x1024@60Hz, instead opting for 1280x1024@61Hz, which no known LCD
panel can display.
Unfortunately the vesa driver ignores all "NoDDC" "IgnoreEDID" and
ModeLine directives. My desired mode is listed in /var/log/Xorg.0.log
as a "Future Video Mode" so I assume that is not supported at this time?
So at the moment we seem to have two options: Fast vesa driver at
1024x768 or slow ati driver at 1280x1024. Neither of which is really
acceptable.
Any ideas?
thanks,
Greg
Have you tried the drivers from http://www.retinalburn.net/linux/ ? I
use them on an old box I have that still runs RH9. Not sure how they
work with Xorg but should be worth a try if you are desperate.
Serge