I need the slolutions to 4 problems:
1.) How to know which version of Gtk+, gcc, glib etc.
I am using.
2.) I think there is some general way of knowing the
versions of different sogtwares installed on one's
system. If there is
anything like this,please tell me.
3.) Please tell me "What are and how to use LINKER
FLAGS like Wl, -L, --rpath.
4.) (MAIN PROBLEM) -- GNU VCDImager problem:
I have installed "LIBCDIO-0.73" on my system (FC-3).
During "./configure" it gives 2 messages:
a.) libcddb bot found
b.) libvcdinfo not found not able to find NEW VERSION
of vcdinfo.... disabling vcdinfo
ALSO when i run the << make check >> i get the
following output (i am only showing the ERROR PART)
################################################################################
PASS: check_fuzzyiso.sh
cdparanoia III release 9.8 libcdio 0.75
i686-redhat-linux-gnu
(C) 2001 Monty <monty@xxxxxxxx> and Xiphophorus
(C) 2004, 2005 Rocky Bernstein <rocky@xxxxxxxxx>
Report bugs to bug-libcdio@xxxxxxx
Checking ./cdda.cue for cdrom...
Verifying drive can read CDDA...
Expected command set reads OK.
Attempting to determine drive endianness from data....
Data appears to be coming back Little Endian.
certainty: 100%
Table of contents (audio tracks only):
track length begin copy
pre ch
===========================================================
1. 302 [00:04.02] 0 [00:00.00] OK
no 2
TOTAL 302 [00:04.02] (audio only)
Ripping from sector 0 (track 1 [0:00.00])
to sector 301 (track 1 [0:04.01])
outputting to cdda.raw
(== PROGRESS == [++ *|
000301 13 ] == :^D * ==)
Done.
44377+0 records in
44377+0 records out
44377+0 records in
44377+0 records out
** Raw cdda.bin extraction okay
cdparanoia III release 9.8 libcdio 0.75
i686-redhat-linux-gnu
(C) 2001 Monty <monty@xxxxxxxx> and Xiphophorus
(C) 2004, 2005 Rocky Bernstein <rocky@xxxxxxxxx>
Report bugs to bug-libcdio@xxxxxxx
Checking ./cdda.cue for cdrom...
Verifying drive can read CDDA...
Expected command set reads OK.
Attempting to determine drive endianness from data....
Data appears to be coming back Little Endian.
certainty: 100%
Table of contents (audio tracks only):
track length begin copy
pre ch
===========================================================
1. 302 [00:04.02] 0 [00:00.00] OK
no 2
TOTAL 302 [00:04.02] (audio only)
Ripping from sector 0 (track 1 [0:00.00])
to sector 301 (track 1 [0:04.01])
outputting to cdda.raw
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
007: Unknown, unrecoverable error reading data
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
)
007: Unknown, unrecoverable error reading data
(== PROGRESS == [eee eeee eeee ee e e e e ee*|
000301 06 ] == :^D * ==)
Done.
cdparanoia III release 9.8 libcdio 0.75
i686-redhat-linux-gnu
(C) 2001 Monty <monty@xxxxxxxx> and Xiphophorus
(C) 2004, 2005 Rocky Bernstein <rocky@xxxxxxxxx>
Report bugs to bug-libcdio@xxxxxxx
Ripping from sector 0 (track 1 [0:00.00])
to sector 301 (track 1 [0:04.01])
outputting to cdda.raw
(== PROGRESS == [++ *|
000301 13 ] == :^D * ==)
Done.
** Under-run correction okay
cdparanoia III release 9.8 libcdio 0.75
i686-redhat-linux-gnu
(C) 2001 Monty <monty@xxxxxxxx> and Xiphophorus
(C) 2004, 2005 Rocky Bernstein <rocky@xxxxxxxxx>
Report bugs to bug-libcdio@xxxxxxx
Checking ./cdda.cue for cdrom...
Verifying drive can read CDDA...
Expected command set reads OK.
Attempting to determine drive endianness from data....
Data appears to be coming back Little Endian.
certainty: 100%
Table of contents (audio tracks only):
track length begin copy
pre ch
===========================================================
1. 302 [00:04.02] 0 [00:00.00] OK
no 2
TOTAL 302 [00:04.02] (audio only)
Ripping from sector 0 (track 1 [0:00.00])
to sector 301 (track 1 [0:04.01])
outputting to cdda.raw
jittering by -584, offset 1768
)
jittering by -536, offset 1816
jittering by -380, offset 1972
jittering by -156, offset 2196
jittering by -480, offset 1872
jittering by -476, offset 1876
jittering by 28, offset 28
jittering by -52, offset 2300
jittering by -312, offset 2040
jittering by 388, offset 388
jittering by 504, offset 504
jittering by 80, offset 80
jittering by -528, offset 1824
jittering by 312, offset 312
jittering by -564, offset 1788
jittering by -288, offset 2064
jittering by -236, offset 2116
jittering by 440, offset 440
jittering by 36, offset 36
)
jittering by 492, offset 492
jittering by 16, offset 16
jittering by 364, offset 364
jittering by -364, offset 1988
jittering by 452, offset 452
jittering by 80, offset 80
jittering by -496, offset 1856
jittering by 368, offset 368
jittering by 568, offset 568
jittering by -448, offset 1904
jittering by 460, offset 460
jittering by 332, offset 332
)
jittering by -468, offset 1884
jittering by -288, offset 2064
)
jittering by -564, offset 1788
(== PROGRESS == [++- - - *|
000301 10 ] == :^D * ==)
Done.
** Small jitter correction okay
cdparanoia III release 9.8 libcdio 0.75
i686-redhat-linux-gnu
(C) 2001 Monty <monty@xxxxxxxx> and Xiphophorus
(C) 2004, 2005 Rocky Bernstein <rocky@xxxxxxxxx>
Report bugs to bug-libcdio@xxxxxxx
Checking ./cdda.cue for cdrom...
Verifying drive can read CDDA...
Expected command set reads OK.
Attempting to determine drive endianness from data....
Data appears to be coming back Little Endian.
certainty: 100%
Table of contents (audio tracks only):
track length begin copy
pre ch
===========================================================
1. 302 [00:04.02] 0 [00:00.00] OK
no 2
TOTAL 302 [00:04.02] (audio only)
Ripping from sector 0 (track 1 [0:00.00])
to sector 301 (track 1 [0:04.01])
outputting to cdda.raw
jittering by -4672, offset 32
)
jittering by -4288, offset 416
jittering by -3040, offset 1664
jittering by -1248, offset 1104
jittering by -3840, offset 864
jittering by -3808, offset 896
jittering by 224, offset 224
jittering by -416, offset 1936
jittering by -2496, offset 2208
jittering by 3104, offset 752
jittering by 4032, offset 1680
jittering by 640, offset 640
jittering by -4224, offset 480
jittering by 2496, offset 144
jittering by -4512, offset 192
jittering by -2304, offset 48
jittering by -1888, offset 464
jittering by 3520, offset 1168
jittering by 288, offset 288
)
jittering by 3936, offset 1584
jittering by 128, offset 128
jittering by 2912, offset 560
jittering by -2912, offset 1792
jittering by 3616, offset 1264
jittering by 640, offset 640
jittering by -3968, offset 736
jittering by 2944, offset 592
jittering by 4544, offset 2192
jittering by -3584, offset 1120
jittering by 3680, offset 1328
jittering by 2656, offset 304
)
jittering by -3744, offset 960
jittering by -2304, offset 48
)
jittering by -4512, offset 192
(== PROGRESS == [ee+ + - *|
000301 12 ] == :^D * ==)
Done.
** under-run + jitter correction okay
PASS: check_paranoia.sh
./check_opts.sh: cd-info option test -T ok.
./check_opts.sh: cd-info option test --no-tracks ok.
./check_opts.sh: cd-info option test -A ok.
./check_opts.sh: cd-info option test --no-analyze ok.
./check_opts.sh: cd-info option test -I ok.
./check_opts.sh: cd-info option test --no-ioctl ok.
./check_opts.sh: cd-info option test -q ok.
./check_opts.sh: cd-info option test --quiet ok.
PASS: check_opts.sh
======================================================
All 13 tests behaved as expected (1 expected failures)
(1 tests were not run)
======================================================
#################################################################################
ANYHOW there is no problem with MAKE nad MAKE INSTALL.
these two run without any errors. Now i see "libcdio
fils " are installed in
/usr/local/lib &
/usr/local/lib/pkgconfig
and i have added these three PATHS in my <
/etc/ld.so.conf > file. also I have addes the
following export lines in my </home/.bashrc> file"
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export PATH=$PATH:/usr/local/lib
export
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig
BUT STILL i get the following message when run <
./configure > in vcdImager directory:
###########################################################################
[hackers@localhost vcdimager-0.7.23]$ ./configure
checking for a BSD-compatible install...
/usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific
portions of Makefiles... no
checking whether build environment is sane... yes
checking build system type... i686-redhat-linux-gnu
checking host system type... i686-redhat-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name...
a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler...
yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none
needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking whether gcc accepts -Wall... yes
checking whether gcc accepts -Wchar-subscripts... yes
checking whether gcc accepts -Wmissing-prototypes...
yes
checking whether gcc accepts -Wmissing-declarations...
yes
checking whether gcc accepts -Wunused... yes
checking whether gcc accepts -Wpointer-arith... yes
checking whether gcc accepts -Wwrite-strings... yes
checking whether gcc accepts -Wnested-externs... yes
checking whether gcc accepts -Wno-sign-compare... yes
checking how to run the C preprocessor... gcc -E
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler...
(cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached)
none needed
checking dependency style of gcc... (cached) gcc3
checking for gawk... (cached) gawk
checking for a sed that does not truncate output...
/bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object
files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries...
pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler...
yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... g77
checking whether we are using the GNU Fortran 77
compiler... yes
checking whether g77 accepts -g... yes
checking the maximum length of command line
arguments... 32768
checking command to parse /usr/bin/nm -B output from
gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... yes
checking if gcc supports -fno-rtti -fno-exceptions...
no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports
shared libraries... yes
checking whether -lc should be explicitly linked in...
no
checking dynamic linker characteristics... GNU/Linux
ld.so
checking how to hardcode library paths into
programs... immediate
checking whether stripping libraries is possible...
yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports
shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports
shared libraries... yes
checking dynamic linker characteristics... GNU/Linux
ld.so
checking how to hardcode library paths into
programs... immediate
checking whether stripping libraries is possible...
yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for g77 option to produce PIC... -fPIC
checking if g77 PIC flag -fPIC works... yes
checking if g77 supports -c -o file.o... yes
checking whether the g77 linker (/usr/bin/ld) supports
shared libraries... yes
checking dynamic linker characteristics... GNU/Linux
ld.so
checking how to hardcode library paths into
programs... immediate
checking whether stripping libraries is possible...
yes
checking for diff... /usr/bin/diff
adding -w to diff in regression tests
adding --unified to diff in regression tests
checking for snprintf... yes
checking for vsnprintf... yes
checking for getdate... yes
checking for strptime... yes
checking for libpopt library... yes
checking for xml2-config... /usr/bin/xml2-config
checking for libxml - version >= 2.3.8... yes (version
2.6.14)
checking for ANSI C header files... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdint.h... (cached) yes
checking for inttypes.h... (cached) yes
checking stdbool.h usability... yes
checking stdbool.h presence... yes
checking for stdbool.h... yes
checking sys/mman.h usability... yes
checking sys/mman.h presence... yes
checking for sys/mman.h... yes
checking whether byte ordering is bigendian... no
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking whether gcc supports ISO C99 _Pragma()... yes
checking how to create empty arrays... []
checking bitfield ordering in structs... LSBF
checking for pkg-config... /usr/bin/pkg-config
checking for libcdio >= 0.72... Package libcdio was
not found in the pkg-config search path.
Perhaps you should add the directory containing
`libcdio.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libcdio' found
configure: error: Required libcdio library not found.
Please get libcdio from
http://www.gnu.org/software/libcdio/ and install it.
[hackers@localhost vcdimager-0.7.23]$
####################################################
I have also tried < ./configure
Wl=/usr/local/lib/pkgconfig >, but this also gives the
same error.
CAN ANYBODY tell me please what is happening and how
to INSTALL GNU vcdImager on my FC-3 system.
Thanks for spending your precious time on
my "Pmail (Problem mail, yes it's not an Email)".
"Fraser"
__________________________________________________________
Yahoo! India Matrimony: Find your partner online. Go to http://yahoo.shaadi.com
