I need to burn some images fast and I cannot figure out how to do it anymore, with either xcdroast or k3b. I have used both apps before with no problem. However today I got a media adapter and plugged it in via usb, Fedora sees it under /media/TOSHIBA512M. Now xcdroast seems to not give me the ability to actually browse for the files to burn (believe it or not) and I looked on the site for that and there seem to be some bugs with the 2.6.x kernel so I am left wondering about that. K3b gives me buffer underrun errors and when I bump the burn down to 4x or 2x it still doesn't work. System is FC3/KDE with an HP cdwriter on it. Also I have the kwikdisk app installed on the desktop which automounts camera flash ram. I noticed when I turned this off that my blank cd-r or cd-rw would mount a little easier. Still I could get neither app to write to the cd. With a cd-r I tried to do an erase and it wouldn't let me do that either.
Here is my k3b output and my mount output. This particular error said to email the developer so I am ccing them as well. I just want to get my images burned asap. Thanks in advance,
Marc
<paste>
[root@13 Desktop]# mount
/dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev/pts type devpts (rw,gid=5,mode=620)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/hdd2 on /boot type ext3 (rw)
none on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
/dev/sda1 on /media/TOSHIBA512M type vfat (rw,nosuid,nodev,sync,noatime,iocharset=utf8,fscontext=system_u:object_r:removable_t)
System ----------------------- K3b Version:0.11.14 KDE Version: 3.4.2-0.fc3.2 Red Hat QT Version: 3.3.4 cdrecord ----------------------- scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 9100 ' Revision : '1.0a' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 4183808 = 4085 KB Drive DMA Speed: 19911 kB/s 113x CD 14x DVD FIFO size : 4194304 = 4096 KB Track 01: data 475 MB Total size: 546 MB (54:07.42) = 243557 sectors Lout start: 546 MB (54:09/32) = 243557 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11834 (97:24/16) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 24 Manufacturer: SONY Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 116292 Speed set to 706 KB/s Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 475 MB written. Track 01: 1 of 475 MB written (fifo 92%) [buf 33%] 103.5x. Track 01: 2 of 475 MB written (fifo 100%) [buf 59%] 104.6x. Track 01: 3 of 475 MB written (fifo 98%) [buf 83%] 104.3x. /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 07 44 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F1 00 03 FF FF D1 BB 12 00 00 00 00 02 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 Sense flags: Blk -11845 (valid) resid: 63488 cmd finished after 0.008s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 3809280 bytes Writing time: 11.656s Average write speed 439.9x. Fixating... Fixating time: 0.003s /usr/bin/cdrecord: fifo had 124 puts and 61 gets. /usr/bin/cdrecord: fifo was 0 times empty and 7 times full, min fill was 87%. cdrecord comand: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=4 -dao -eject -data -tsize=243557s - mkisofs ----------------------- 243557 INFO: UTF-8 character encoding detected by locale settings. Assuming UTF-8 encoded filenames on source filesystem, use -input-charset to override. 0.21% done, estimate finish Sun Aug 21 19:25:14 2005 0.42% done, estimate finish Sun Aug 21 19:21:19 2005 0.62% done, estimate finish Sun Aug 21 19:19:59 2005 0.83% done, estimate finish Sun Aug 21 19:19:19 2005 1.03% done, estimate finish Sun Aug 21 19:30:16 2005 1.23% done, estimate finish Sun Aug 21 19:28:08 2005 1.44% done, estimate finish Sun Aug 21 19:26:33 2005 mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -volid Ian pics burned 8-21-05 -volset -appid K3B THE CD KREATOR VERSION 0.11.14 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer K3b - Version 0.11.14 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bloq27a.tmp -rational-rock -hide-list /tmp/kde-root/k3byr3NWb.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3b39jYna.tmp /root/.kde/share/apps/k3b/temp/dummydir0/
