On Wed, Jul 20, 2005 at 03:22:04PM -0400, taharka wrote: > Howdy, > Danny Terweij wrote: > > >From: "taharka" <res00vl8@xxxxxxxxxx> > > > > > > > >>>Can anyone suggest a hardware based PCI fax modem that works > >>>with HylaFAX and which is also compatible with Fedora Core 3? > >>>Thanks, > >>>Amal > >>> > >>> > >>> > >>Yep, have a look at the Unix/Linux certified PCI modes from Multi-Tech > >>System, Inc. (multitech.com). No comparison ;-) If it doesn't work for > >>your application, you can get a full refund. > >> > >>taharka > >> > >> > > > >I use E-tech Bullet modem E56K (rockwell chipset). No problems with it. > >All class1/2 (fax)modems are supported according to Hylafax software. > >It just needs the serial port.. i did attatched it to ttyS0 and used that > >too in the configs. > > > >Danny. > > > > > > > This appears to be an external modem. It is my understanding the OP is > looking for a PCI modem, which makes it internal. > > taharka > > Lexington, Kentucky U.S.A. > That's correct! I am looking for a hardware-based internal PCI modem. I could have gone for an external modem if I had a spare serial port. The only serial port on my box has APC UPS attached. I am not sure if a USB modem would work with FC3 and HylaFAX. Any suggestions? I checked out Multitech modems at their website. It looks good. The modems suppport both Fax class 1 and 2 protocols. Thank you all for your help. Best regards, Amal
