On Thursday 07 July 2005 1:39 pm, Erico Augusto wrote: > Steve, > > try to run system-config-printer in X (if your server doesn't have X, > access the server through Client machine . Run a terminal, access the > server through ssh,telnet[whatever] and call system-config-printer) > > Observe if sharing is enable to the printer in question. In negative > case, enable it. > > If don't work, answer with the > > <Location /printers/deskjet-5550-2> > > session of your cupsd.conf file. > > Erico. > > Em Qui, 2005-07-07 �12:07 -0700, Steve Croteau escreveu: > > Greetings, > > > > Both legacy boxes run FC3. > > > > According to /etc/cups/printers.conf, > > device URI on Server is usb:/dev/usb/lp0 > > device URI on Client is ipp://192.168.0.2:631/printers/deskjet-5550-2 > > > > Server is set to share to 192.168.0.0/255.255.255.0 > > > > Both machines ping each other. Both machines have port 631 udp & tcp > > open. > > > > Why can't client print to server? I get "Network host 192.168.0.2 is > > busy; will retry in 30 seconds". > > > > Thank you, > > Steve Erico, I'm just a novice at this but when I attempted to telnet from both machines, I got a 'connection refused' message. I'll check my firewall... Thanks, Steve