Kazutoshi Morioka wrote:
I removed "rhgb quiet" from kernel command line and got these messages:
...snip...
ALI15X3: IDE controller at PCI slot 0000:00:10.0
ACPI: PCI interrupt 0000:00:10.0[A]: no GSI - using IRQ 0
PCI: setting IRQ 0 as level-triggered
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:pio, hdd:pio
So, it seems an ACPI IRQ probing problem.
I added "acpi=off" to kernel command line, the laptop booted well.
But, I'm not very happy because power is won't off when shutdown...
On Sat, 2 Jul 2005 15:04:51 +0900
Kazutoshi Morioka <morioka@xxxxxxxxxxxxx> wrote:
After yum update to kernel-2.6.12-1.1387_FC4, my laptop Compaq nx9005 dosen't boot.
messages are:
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.12-1.1387_FC4 ro root=LABEL=/ rhgb quiet
[Linux-bzImage, setup=0x1e00, size=0x18d7d9]
initrd /initrd-2.6.12-1.1387_FC4.img
[Linux-initrd @ 0xddd1000, 0x10e936 bytes]
This is the portion that I had the hangup at. Others referred to the
need to boot with acpi=off - which is not possible on this computer.
Since your error is similar to mine, I'm guessing that you need acpi and
this kernel version is useless in its present state. I boot runlevel 3
on the installation that is inflicted with this kernel version and can
confirm a like effect.
Jim
--
No house is childproofed unless the little darlings are in straitjackets.
