Hi All, I am trying to get a dual-head display to work with FC4. I also have spent hours googling and tweaking my xorg.conf to no avail. Here is the issue... I am using a Compaq nx7000 with a Radeon Mobility 9200 dual-head video card. However, when I boot I ONLY get video on the external display, regardless of how I configure my xorg.conf. Ultimately I want to get spanning displays. Here is my xorg.conf file. Any assistance will be greatly appreciated. Blessings Richard Section "ServerLayout" Identifier "Single head Configuration" Screen "Screen0" #0 0 Screen "Screen1" LeftOf "Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Synaptics" "AlwaysCore" Option "Xinerama" "on" Option "Clone" "off" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "synaptics" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "InputDevice" Identifier "Synaptics" Driver "synaptics" Option "Device" "/dev/input/mice" Option "Protocol" "auto-dev" Option "Emulate3Buttons" "yes" Option "LeftEdge" "1500" Option "RightEdge" "1500" Option "TopEdge" "1500" Option "BottomEdge" "1500" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "LCD Panel 1400x1050" HorizSync 31.5 - 60.0 VertRefresh 59.0 - 75.0 Option "dpms" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "LCD Panel 1280x1024" HorizSync 31.5 - 67.0 VertRefresh 50.0 - 75.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon Mobility M9" Screen 0 BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Videocard1" Driver "radeon" VendorName "Videocard Vendor" BoardName "ATI Radeon Mobility M9" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1680x1050" "1400x1050" "1280x960" "1280x800" "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection
