On Sun, 2005-06-19 at 14:41 -0400, Jeffrey Ross wrote: > I have installed FC4 on a IBM Thinkpad 600X however I have 3 problems so > far. > First I can not use the wireless card reliably on the system. I have a > Cisco Aironet 350 wireless card, the system recognized the card and > obtains a dhcp address. I can then use the network normally for a > random amount of time ranging from seconds to usually no more than 15 > minutes and then all traffic stops. The easiest way to get the card > running again is to pull the card out and re-insert it, once this is > done the work "cycle" starts again. What did I do wrong? If you are using NetworkManager - try disabling it and using standard networking. That worked for me (though different card - madwifi) > > Second, I am unable to use the sound on the system, the sound did work > under FC3, lspci shows the sound to be > > 00:06.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 > [CrystalClear SoundFusion Audio Accelerator] (rev 01) Same thing for me (Thinkpad T20) I did find though that if I turn all the mixers all the way up - I can hear static.
