scsi1: qla4xxx_mailbox_command: Trying to execute a mailbox request, while another one is interrupting
Service existing interrupt first
scsi1: qla4xxx_mailbox_command: **** FAILED, cmd = 00000069, sts = 00000000 ****
0x00 mailbox[0] = 0x00004000
0x04 mailbox[1] = 0x00000001
0x08 mailbox[2] = 0x00040002
0x0C mailbox[3] = 0x00000010
0x10 mailbox[4] = 0x00000001
0x14 mailbox[5] = 0x00000000
0x18 mailbox[6] = 0x00000000
0x1C mailbox[7] = 0xFFFFAD37
0x20 flash_address = 0x00057DFF
0x24 flash_data = 0x000000FF
0x28 ctrl_status = 0x00000040
0x2C nvram = 0x00000008
0x38 req_q_in = 0x00000000
0x3C rsp_q_out = 0x00000000
0x50 ext_hw_conf = 0x00001916
0x58 port_ctrl = 0x00000C1F
0x5C port_status = 0x0001C61D
0x80 req_q_out = 0x00000000
0xE0 gp_out = 0x00000003
0xE4 gp_in = 0x0000000E
0xFC port_err_status = 0x00000000
scsi1: qla4extioctl_query_hba_iscsi_portal: MBOX_CMD_GET_FW_STATE failed w/ status 0000
Jimmy McMillan wrote:
Awesome, got it compiled, and probed. So far so good. I got a few warnings included at compile time, but all in all it's working. I'm gonna setup random writes to the device for a day to see if it eventually fails. It's so random. Thanks alot Andy!
qla4xxx -- Building the qla4xxx driver...
make: Entering directory `/lib/modules/2.6.11-1.27_FC3smp/build'
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_os.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_init.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_mbx.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_iocb.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_isr.o
/usr/src/qlogic/v5.00.02-1/5.00.02/ql4_isr.c: In function `qla4xxx_check_and_copy_sense':
/usr/src/qlogic/v5.00.02-1/5.00.02/ql4_isr.c:161: warning: ISO C90 forbids mixed declarations and code
/usr/src/qlogic/v5.00.02-1/5.00.02/ql4_os.c: In function `qla4xxx_config_dma_addressing':
/usr/src/qlogic/v5.00.02-1/5.00.02/ql4_os.c:876: warning: ignoring return value of `pci_set_consistent_dma_mask', declared with attribute warn_unused_result
/usr/src/qlogic/v5.00.02-1/5.00.02/ql4_os.c:884: warning: ignoring return value of `pci_set_dma_mask', declared with attribute warn_unused_result
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_isns.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_nvram.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_dbg.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_cfg.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_cfgln.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_fo.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_foio.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_foioctl.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_foln.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_xioct.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_inioct.o
CC [M] /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_32ioctl.o
LD [M] /usr/src/qlogic/v5.00.02-1/5.00.02/qla4xxx.o
Building modules, stage 2.
MODPOST
CC /usr/src/qlogic/v5.00.02-1/5.00.02/qla4xxx.mod.o
LD [M] /usr/src/qlogic/v5.00.02-1/5.00.02/qla4xxx.ko
make: Leaving directory `/lib/modules/2.6.11-1.27_FC3smp/build'
Andy Green wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Jimmy McMillan wrote: | Also here's a build error I get when compiling the module.
| /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_os.c: In function | `qla4xxx_probe_adapter': | /usr/src/qlogic/v5.00.02-1/5.00.02/ql4_os.c:195: sorry, unimplemented: | inlining failed in call to 'qla4xxx_config_dma_addressing': function | body not available
These are likely genuine problems with the source which the later version of the compiler you have now is detecting and complaining about, whereas previous versions of the compiler silently accepted the error.
Remove the "inline" token at the function declarations and it should continue.
- -Andy -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFCnHs8jKeDCxMJCTIRAhFzAJ9EDEffZ3ihzpaFkitYpzMxMDX0FQCfaviy NfsjZg1If4j35NU7qm1Buw0= =XJN4 -----END PGP SIGNATURE-----
