Re: eth0

["List" <list@xxxxxxxxxx>]

> > > > My route information.
> > > >
> > > > Kernel IP routing table
> > > > Destination     Gateway         Genmask         Flags Metric Ref    Use
> > > > Iface
> > > > 203.208.228.0   *               255.255.255.0   U     0      0        0 
> > > > eth0
> > > > 169.254.0.0     *               255.255.0.0     U     0      0        0 
> > > > eth0
> > > > default         203.208.228.129 0.0.0.0         UG    0      0        0 
> > > > eth0
> > >
> > >
> > > I had a similar situation a couple of days ago. Running
> > > redhat-config-network and adding the gateway there didn't help any too
> > > since as soon as I'd finish adding the gateway and doing a
> > > "/etc/rc.d/init.d/network restart" my gateway would disappear again.
> > >
> > > In the end I added the line GATEWAY=xxx.xxx.xxx.xxx to the
> > > /etc/sysconfig/network file by hand and that seemed to fix it.
> >
> >
> > I do actually have that line.
> >
> > [root@advanced root]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
> > DEVICE=eth0
> > ONBOOT=yes
> > BOOTPROTO=static
> > IPADDR=203.208.228.*
> > NETMASK=255.255.255.0
> > GATEWAY=203.208.228.129
>
> You shouldn't have that line in
> /etc/sysconfig/network-scripts/ifcfg-eth0.  It should be in
> /etc/sysconfig/network...right after the "HOSTNAME=" line.

Thanks alot Rick and Faisal.