Slava Bizyayev wrote:
On Tue, 2005-04-19 at 06:11, Jim Cornette wrote:
Yuandan Zhang wrote:
Michael Hennebry wrote:
On 16 Apr 2005, Slava Bizyayev wrote:
I use kernel-2.6.10-1.770_FC3 on my HP OmniBook XE2 pretty happily.
After updating kernel to kernel-2.6.11-1.14_FC3 I experience a strange
behavior -- in the end of the boot (instead of X-login screen) machine
freezes, and I cannot even get the terminal access with ctrl-alt-F1. Has
someone experienced something similar? What's the work around?
Hi, I got exactly the same problem. I upgaded kernel from
kernel-2.6.10-1.770_FC3 on my HP nx5000 to kernel-2.6.11-1.14_FC3, Boot
freezed. I troed to boot to the old kernel kernel-2.6.10-1.770_FC3, it
froze too.
If the kernel-2.6.10-1.770_FC3 used to work and then stopped working
after upgrading to the kernel-2.6.11-1.14_FC3 version, using the
original kernel might not be of much help. There is probably a problem
related to something else that you installed along with the kernel
update that is causing you problems.
In my case kernel-2.6.10-1.770_FC3 is running just fine when I'm quick
enough to switch on boot...
Any other ideas?
Thanks,
Slava
Intel mobo D845GBV:
kernel-2.6.11-1.14_FC3 starts fine with X.
After 1 hour or more just freezes.
Even over night with only daemons running.
Got some ACPI errors.
kernel-2.6.10-1.770_FC3 runs just fine.
mobo EP-61BXA-M (pre 2001 bios):
At boot it says the acpi can be forced by acpi=on
Same symptoms.
Lost complete installation (xfs fs).
Best regards, Bob
--
Bob Marcan, Consultant mailto:bob.marcan@xxxxxx
S&T Hermes Plus d.d. tel: +386 (1) 5895-300
Slandrova ul. 2 fax: +386 (1) 5895-202
1231 Ljubljana - Crnuce, Slovenia url: http://www.snt.si
