Jeffery wrote, > Does anyone have a working driver (or suggestions) for the Adaptec > U320 39320 (aic7900) SCSI adapter (no raid) for FC3? The one in the > distribution does not work on my brand new Dell PowerEdge. I can > load enterprise 3 with the driver from the Dell website, but Fedora > doesn't seem to recognize enterprise drivers (is that always the > case?) I had this recently with a Dell SC1425, and then again a couple of weeks ago with a Precision 670. The "solution" for the SC1425 was to remove the SCSI controller and install to a SATA drive instead. Having done that, I discovered that recent FC3 update kernels recognized the controller quite happily, so for the Precision I built a fresh install image with an updated kernel roughly as described here, http://fedoranews.org/contributors/gene_czarcinski/update_distro/ A bit laborious despite taking some shortcuts (I used my existing FC3 install CDs as the source, didn't build the SRPM ISOs, only burnt disk one and did a minimal install from that), but problem solved. If you can cope with the bleeding edge an FC4 or Rawhide install should also be OK. Cheers, Miles
