Ok this seems weird to me. I have had FC3 installed and running now for 3 months with no problems or even a reboot :-) But I just noticed my / partion is getting full. Only trouble is is that it only shows it is a 39GB partition but really it is 74GB. Anyone see this before ? It is a problem with df only showing 39GB it Is a SATA drive so the one I need help with is /dev/sda. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 39G 24G 13G 66% / <------------------------------- /dev/hdb1 151G 25G 119G 18% /Storage none 506M 0 506M 0% /dev/shm /dev/hda1 92G 21G 67G 24% /VirtualMachines fdisk /dev/sda Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 9601 77120001 83 Linux <--------------------------- /dev/sda2 9602 9729 1028160 5 Extended /dev/sda5 9602 9729 1028128+ 82 Linux swap dmesg scsi1 : sata_sil ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f ata2: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48 ata2: dev 0 configured for UDMA/100 scsi2 : sata_sil Vendor: ATA Model: ST380013AS Rev: 3.05 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 SELinux: initialized (dev sda1, type ext3), uses xattr EXT3 FS on sda1, internal journal Adding 1028120k swap on /dev/sda5. Priority:-1 extents:1 WEBMIN : Location SCSI device A Cylinders 9729 Size 75 GB Model ATA ST380013AS Controller 2 Target 0 No. Type Extent Start End Use Free 1 Linux 1 9601 / 33 % 2 Extended 9602 9729 5 Linux swap 9602 9729 swap Add primary partition Add logical partition
