Hey all,
I bought a new Sony CDRW model #crx320AD
Linux pilsner.xxxxxxx 2.4.20-42.9.legacy #1 Sun Feb 20 13:06:17 EST
2005 i686 athlon i386 GNU/Linux
nautilus-cd-burner-0.3.2-1
cdrecord-2.0-11.9.3.legacy
xcdroast-0.98a13-4
I have attempted to burn an ISO image I created with xcdroast
Here is the output or several tries to burn the image, and below that
is the output I see from the kernel via dmesg.
Will Fedora or RHEL fix this?
Thanks
==========================
[root@pilsner ISO]# cdrecord -scanbus
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) 'IOMEGA ' 'ZIP 100 ' 'E.08' Removable Disk
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'SONY ' 'CD-RW CRX230ED ' '4YS1' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
[root@pilsner ISO]# cdrecord -v -checkdrive dev=1,0,0
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX230ED '
Revision : '4YS1'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1419264 = 1386 KB
[root@pilsner ISO]# cdrecord -v speed=32 dev=1,0,0 MSU_backup-01.img
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX230ED '
Revision : '4YS1'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1419264 = 1386 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 409 MB
Total size: 470 MB (46:34.26) = 209570 sectors
Lout start: 470 MB (46:36/20) = 209570 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11752 (97:25/23)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 8
Manufacturer: Hitachi Maxell, Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 150279
Forcespeed is OFF.
Starting to write CD/DVD at speed 16 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01: 31 of 409 MB written (fifo 100%) [buf 96%] 21.8x.cdrecord: Input/
output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 3F B2 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 4.948s timeout 40s
write track data: error after 33394688 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 28.122s
Average write speed 129.5x.
Min drive buffer fill was 96%
Fixating...
Fixating time: 27.100s
cdrecord: fifo had 590 puts and 527 gets.
cdrecord: fifo was 0 times empty and 316 times full, min fill was 92%.
[root@pilsner ISO]#
[root@pilsner ISO]# cdrecord -scanbus
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) 'IOMEGA ' 'ZIP 100 ' 'E.08' Removable Disk
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'SONY ' 'CD-RW CRX230ED ' '4YS1' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
[root@pilsner ISO]# cdrecord -v speed=4 dev=1,0,0 MSU_backup-01.img
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX230ED '
Revision : '4YS1'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1419264 = 1386 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 409 MB
Total size: 470 MB (46:34.26) = 209570 sectors
Lout start: 470 MB (46:36/20) = 209570 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 150276
Forcespeed is OFF.
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01: 128 of 409 MB written (fifo 100%) [buf 99%] 4.3x.cdrecord:
Input/output
error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 01 01 91 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 3.449s timeout 40s
write track data: error after 135038976 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 220.656s
Average write speed 13.0x.
Min drive buffer fill was 99%
Fixating...
Fixating time: 65.522s
cdrecord: fifo had 2191 puts and 2128 gets.
cdrecord: fifo was 0 times empty and 2116 times full, min fill was 95%.
[root@pilsner ISO]#
[root@pilsner ISO]# cdrecord -v fs=10 speed=4 dev=1,0,0 MSU_backup-01.img
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX230ED '
Revision : '4YS1'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1419264 = 1386 KB
FIFO size : 10 = 0 KB
Track 01: data 409 MB
Total size: 470 MB (46:34.26) = 209570 sectors
Lout start: 470 MB (46:36/20) = 209570 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11634 (97:26/66)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 150276
cdrecord: write-buffer too small, minimum is 192k. Disabling.
Forcespeed is OFF.
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 409 MB written.Segmentation fault
[root@pilsner ISO]#
-----------------------------
hdc: drive not ready for command
hdc: status error: status=0x51 { DriveReady SeekComplete Error }
hdc: status error: error=0x00
ide-scsi: Strange, packet command initiated yet DRQ isn't asserted
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: drive not ready for command
hdc: ATAPI reset complete
hdc: status error: status=0x51 { DriveReady SeekComplete Error }
hdc: status error: error=0x00
ide-scsi: Strange, packet command initiated yet DRQ isn't asserted
hdc: status error: status=0x48 { DriveReady DataRequest }
hdc: drive not ready for command
hdc: status error: status=0x51 { DriveReady SeekComplete Error }
hdc: status error: error=0x00
ide-scsi: Strange, packet command initiated yet DRQ isn't asserted
hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdc: drive not ready for command
hdc: ATAPI reset complete
hdc: status error: status=0x51 { DriveReady SeekComplete Error }
hdc: status error: error=0x00
ide-scsi: Strange, packet command initiated yet DRQ isn't asserted
hdc: status error: status=0x48 { DriveReady DataRequest }
hdc: drive not ready for command
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 0
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 1
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 2
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 3
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 4
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 5
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 6
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 7
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 64
ide-scsi: hdc: unsupported command in request queue (0)
