Hello,
I have installed FC3 kernel 2.6.10-1.760_FC3smp on a gateway 7200x pc which includes a samsung cd/dvdrw drive.
When I use cdrecord to write either cd or dvd iso images, I get the following errors:
command: cdrecord -v -dao -dev=ATA:0,0,0 bkup.iso
messages:
scsidev: 'ATA:0,0,0'
devname: 'ATA'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identifikation : 'CD/DVDW TS-H552B'
Revision : 'GA02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0000
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 373539177 = 364784 KB
FIFO size : 4194304 = 4096 KB
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x01 (medium not present - tray closed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
cdrecord: No disk / Wrong disk!
Track 01: data 330 MB
Total size: 380 MB (37:38.90) = 169418 sectors
Lout start: 380 MB (37:40/68) = 169418 sectors
When I do a cdrecord --scanbus, I get:
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'TSSTcorp' 'CD/DVDW TS-H552B' 'GA02' Removable CD-ROM
0,1,0 1) 'SAMSUNG ' 'DVD-ROM SD-616E ' 'F500' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
lspci yields:
00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04)
00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04)
00:1b.0 Class 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV380 0x3e50 [Radeon X600]
01:00.1 Display controller: ATI Technologies Inc: Unknown device 3e70
03:00.0 Ethernet controller: Marvell Technology Group Ltd.: Unknown device 4361 (rev 17)
06:02.0 Communication controller: Conexant: Unknown device 2f20
06:05.0 FireWire (IEEE 1394): Agere Systems (former Lucent Microelectronics) FW323 (rev 61)
and lsmod yields:
Module Size Used by
vfat 16577 1
fat 41185 1 vfat
parport_pc 29701 1
lp 15405 0
parport 37129 2 parport_pc,lp
autofs4 21829 0
sunrpc 135077 1
md5 8001 1
ipv6 236897 26
ipt_REJECT 10561 1
ipt_state 5825 4
ip_conntrack 45317 1 ipt_state
iptable_filter 7489 1
ip_tables 20929 3 ipt_REJECT,ipt_state,iptable_filter
dm_mod 57925 0
video 19653 0
button 10577 0
battery 13253 0
ac 8773 0
usb_storage 63369 0
ohci1394 35033 0
ieee1394 300537 1 ohci1394
uhci_hcd 33497 0
ehci_hcd 33737 0
i2c_i801 11981 0
i2c_core 24513 1 i2c_i801
snd_azx 19552 0
snd_hda_codec 43904 1 snd_azx
snd_pcm_oss 52128 0
snd_mixer_oss 21888 1 snd_pcm_oss
snd_pcm 83332 3 snd_azx,snd_hda_codec,snd_pcm_oss
snd_timer 26756 1 snd_pcm
snd 53476 6 snd_azx,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 12961 1 snd
snd_page_alloc 13572 2 snd_azx,snd_pcm
floppy 56913 1
sk98lin 166540 1
speakup_dectlk 9425 0
speakupmain 60653 1 speakup_dectlk
pcspkr 7697 0
ext3 117961 6
jbd 57177 1 ext3
ata_piix 12485 6
libata 44101 1 ata_piix
sd_mod 20545 7
scsi_mod 116161 3 usb_storage,libata,sd_mod
any suggestions / ponters gratefully accepted. I know I may need to recompile a module or update something since I have had to update teh network and sound drivers so far, but I just want to get this to work.
TIA, Don Raikes
_________________________________________________________________
Don?t just search. Find. Check out the new MSN Search! http://search.msn.click-url.com/go/onm00200636ave/direct/01/
