On Sun, 2005-03-13 at 04:31 -0500, Claude Jones wrote: > I had successfully configured an FC3 box at work to serve as internet > router, firewall, web server, DHCP server to my Lan, etc. Tonight, I > moved it to its final destination, my home, and I'm completely stuck on > one issue. > The web server works. > The box has internet access. > Machines on the Lan are getting DHCP assigned IP addresses. They are > also able to see my lone web page. > However, the machines on the Lan can't get past the firewall. It's not a > DNS problem because it doesn't go away if you put an IP address in. I > can ping the Wan NIC from the LAN but nothing further than that. > I've reviewed the procedures over and over that I used successfully, > and I can't find the problem. > DHCPD loads without errors. > I've checked and rechecked the firewall and SELinux settings, and they > appear to be the same as at the office. > I've reviewed the network settings for my NICs twenty times. > IP forwarding and masquerade have been set up. > What have I overlooked??? I have to have this running in three hours so > any suggestions would be greatly appreciated! > > Claude Jones > Bluemont, VA, USA > IP Forwarding maybe? net.ipv4.ip_forward = 1 in /etc/sysctl.conf. Bob...
