On Wed, 2005-03-09 at 18:20, Claude Jones wrote: > Scot L. Harris wrote: > > > >The AP is acting as a transparent bridge. The problem may be that the > >APs address is 192.168.0.50 per the documents. Make sure you configure > >your laptop for 192.168.0.52 or something in that same subnet and as the > >instructions say use a direct connect wire for this. > > > > > > > Thanks, Scot. You pointed me in the direction of the one obvious thing I > hadn't tried. I reconfigured the hardware NIC in the laptop to the same > subnet as the AP and connected right up when I plugged the AP cable > straight in to the laptop. I changed its address to be consistent with > my subnet and then put everything back. Now, I can see the AP from my > Linux box and all is well. Thanks to all. I'm glad you got it resolved. Sometimes it takes several passes before enough of a picture of the problem is understood to get to the solution. -- Scot L. Harris webid@xxxxxxxxxx The important thing is not to stop questioning.
