Paul Howarth wrote:
Longming Lee wrote:
I have a external SCSI DISK ARRAY, and I have installed RH9 at the PC
with
LSI SCSI now.
You do realise that this is a Fedora list, not a Red Hat Linux list?
I want to install Adaptec SCSI(ASC-29160) driver more.
And then this SCSI DISK ARRAY can boot from PC with ASC-29160 at once,
if the LSI SCSI is broken down.
The /etc/modules.conf now is:
alias eth0 e1000
alias eth1 e1000
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptscsih
alias usb-controller usb-ohci
How should I do and then the SCSI DISK ARRAY can boot from LSI SCSI
or ASC-29160?
Try adding:
alias scsi_hostadapter2 aic7xxx
to /etc/modules.conf
You'll then need to re-run mkinitrd to build a new initrd for your
kernel. The exact command line for running this will depend on what
kernel you're running, but it'll be something like:
# mkinitrd -v /boot/initrd-2.4.20-42.9.legacy 2.4.20-42.9.legacy
Actually, that should be:
# mkinitrd -fv /boot/initrd-2.4.20-42.9.legacy.img 2.4.20-42.9.legacy
----------------------------------------------------------------------
- Rick Stevens, Senior Systems Engineer rstevens@xxxxxxxxxxxxxxx -
- VitalStream, Inc. http://www.vitalstream.com -
- -
- Beware of programmers who carry screwdrivers -
----------------------------------------------------------------------
